[PATCH v2 1/2] ARM: shmobile: r8a7778: add HPB-DMAC support

[Simon Horman]

[ Cc Morimoto-san ]

On Tue, Jul 23, 2013 at 02:22:04AM +0400, Sergei Shtylyov wrote:
> From: Max Filippov <max.filippov at cogentembedded.com>
> 
> Add HPB-DMAC platform device on R8A7778 SoC along with its slave and channel
> configurations.
> 
> Signed-off-by: Max Filippov <max.filippov at cogentembedded.com>
> [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed <mach/dma.h>
> to <mach/r8a7778.h>, removed #include <mach/dma.h> from setup-r8a7778.c, removed
> SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and
> hpb_dmae_channels[].]
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
> 
> ---
> Changes in version 2:
> - moved *enum* declaring HPB-DMAC slave IDs from the separate header file to
>   <mach/r8a7778.h>, removed #include <mach/dma.h> from setup-r8a7778.c;
> - removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[]
>   and hpb_dmae_channels[].
> 
>  arch/arm/mach-shmobile/include/mach/r8a7778.h |    8 ++
>  arch/arm/mach-shmobile/setup-r8a7778.c        |   80 ++++++++++++++++++++++++++
>  2 files changed, 88 insertions(+)

Morimoto-san, Magnus,

could you please review this?

> 
> Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h
> ===================================================================
> --- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7778.h
> +++ renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h
> @@ -1,6 +1,7 @@
>  /*
>   * Copyright (C) 2013  Renesas Solutions Corp.
>   * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
> + * Copyright (C) 2013  Cogent Embedded, Inc.
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
> @@ -23,6 +24,13 @@
>  #include <linux/sh_eth.h>
>  #include <linux/platform_data/usb-rcar-phy.h>
>  
> +/* HPB-DMA slave IDs */
> +enum {
> +	HPBDMA_SLAVE_DUMMY,
> +	HPBDMA_SLAVE_SDHI0_TX,
> +	HPBDMA_SLAVE_SDHI0_RX,
> +};
> +
>  extern void r8a7778_add_standard_devices(void);
>  extern void r8a7778_add_standard_devices_dt(void);
>  extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
> Index: renesas/arch/arm/mach-shmobile/setup-r8a7778.c
> ===================================================================
> --- renesas.orig/arch/arm/mach-shmobile/setup-r8a7778.c
> +++ renesas/arch/arm/mach-shmobile/setup-r8a7778.c
> @@ -24,6 +24,7 @@
>  #include <linux/irqchip/arm-gic.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> +#include <linux/platform_data/dma-rcar-hpbdma.h>
>  #include <linux/platform_data/gpio-rcar.h>
>  #include <linux/platform_data/irq-renesas-intc-irqpin.h>
>  #include <linux/platform_device.h>
> @@ -333,6 +334,84 @@ void __init r8a7778_add_mmc_device(struc
>  		info, sizeof(*info));
>  }
>  
> +/* HPB-DMA */
> +
> +/* Asynchronous mode register (ASYNCMDR) bits */
> +#define	ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
> +#define	ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
> +
> +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
> +	{
> +		.id	= HPBDMA_SLAVE_SDHI0_TX,
> +		.addr	= 0xffe4c000 + 0x30,
> +		.dcr	= DCR_SPDS_16BIT | DCR_DMDL | DCR_DPDS_16BIT,
> +		.rstr	= ASYNCRSTR_ASRST21 | ASYNCRSTR_ASRST22 |
> +			  ASYNCRSTR_ASRST23,
> +		.mdr	= ASYNCMDR_ASMD21_SINGLE,
> +		.mdm	= ASYNCMDR_ASMD21_MASK,
> +		.port	= 0x0D0C,
> +		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
> +		.dma_ch	= 21,
> +	}, {
> +		.id	= HPBDMA_SLAVE_SDHI0_RX,
> +		.addr	= 0xffe4c000 + 0x30,
> +		.dcr	= DCR_SMDL | DCR_SPDS_16BIT | DCR_DPDS_16BIT,
> +		.rstr	= ASYNCRSTR_ASRST21 | ASYNCRSTR_ASRST22 |
> +			  ASYNCRSTR_ASRST23,
> +		.mdr	= ASYNCMDR_ASMD22_SINGLE,
> +		.mdm	= ASYNCMDR_ASMD22_MASK,
> +		.port	= 0x0D0C,
> +		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
> +		.dma_ch	= 22,
> +	},
> +};
> +
> +static const struct hpb_dmae_channel hpb_dmae_channels[] = {
> +	/* ch. 21 SD0 */
> +	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX),
> +	/* ch. 22 SD0 */
> +	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX),
> +};
> +
> +static struct hpb_dmae_pdata dma_platform_data __initdata = {
> +	.slaves			= hpb_dmae_slaves,
> +	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
> +	.channels		= hpb_dmae_channels,
> +	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
> +	.ts_shift		= {
> +		[XMIT_SZ_8BIT]	= 0,
> +		[XMIT_SZ_16BIT]	= 1,
> +		[XMIT_SZ_32BIT]	= 2,
> +	},
> +	.num_hw_channels	= 39,
> +};
> +
> +static struct resource hpb_dmae_resources[] __initdata = {
> +	/* Channel registers */
> +	DEFINE_RES_MEM(0xffc08000, 0x1000),
> +	/* Common registers */
> +	DEFINE_RES_MEM(0xffc09000, 0x170),
> +	/* Asynchronous reset registers */
> +	DEFINE_RES_MEM(0xffc00300, 4),
> +	/* Asynchronous mode registers */
> +	DEFINE_RES_MEM(0xffc00400, 4),
> +	/* IRQ for DMA channels */
> +	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
> +};
> +
> +static void __init r8a7778_register_hpb_dmae(void)
> +{
> +	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
> +					  hpb_dmae_resources,
> +					  ARRAY_SIZE(hpb_dmae_resources),
> +					  &dma_platform_data,
> +					  sizeof(dma_platform_data));
> +}
> +
>  void __init r8a7778_add_standard_devices(void)
>  {
>  	int i;
> @@ -355,6 +434,7 @@ void __init r8a7778_add_standard_devices
>  
>  	r8a7778_register_tmu(0);
>  	r8a7778_register_tmu(1);
> +	r8a7778_register_hpb_dmae();
>  }
>  
>  void __init r8a7778_init_late(void)
>