[PATCH v5 11/16] ARM: tegra: Enable PCIe controller on Cardhu

[Thierry Reding]

From: Jay Agarwal <jagarwal at nvidia.com>

Root port 2 is routed to the bottom connector on Cardhu and is used by
the development dock to provide gigabit ethernet and USB functionality.

Signed-off-by: Jay Agarwal <jagarwal at nvidia.com>
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 arch/arm/boot/dts/tegra30-cardhu.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index c011b67..ee8fff8 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -31,6 +31,26 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&pex_hvdd_3v3_reg>;
+		vdd-supply = <&ldo1_reg>;
+		avdd-supply = <&ldo2_reg>;
+
+		pci at 1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci at 2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci at 3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
-- 
1.8.1.5