Enabling USBH1 on mx53qsb

[Marek Vasut]

Dear Fabio Estevam,

> On Thu, Jul 25, 2013 at 12:37 AM, Peter Chen <peter.chen at freescale.com> wrote:
> > seems u-boot already support mx53.
> > 
> > Can you measure the host 1 vbus pin? The vbus should be 5v to let
> > the host works normal.
> 
> The VBUS is the same for both USBH1 port and OTG ports and it is at
> 5V, since OTG port does work.

Check either VBUS or clock, it's one of those ;-)

Best regards,
Marek Vasut