[PATCH 1/2] ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module

[Shawn Guo]

On Wed, Jul 24, 2013 at 10:33:20PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 07/24/2013 08:35 PM, Philipp Zabel wrote:
> 
> >Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> >---
> >  arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> 
> >diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> >index f5e1981..5113d29 100644
> >--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> >+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
> >@@ -20,6 +20,20 @@
> >  	};
> >  };
> >
> >+&ecspi3 {
> >+	pinctrl-names = "default";
> >+	pinctrl-0 = <&pinctrl_ecspi3_1>;
> >+	status = "okay";
> >+	fsl,spi-num-chipselects = <1>;
> >+	cs-gpios = <&gpio4 24 0>;
> >+
> >+	flash: m25p80 at 0 {
> 
>    Quoting the EPAPR spec [1]: "The name of a node should be
> somewhat generic, reflecting the function of the device and not its
> precise programming model. If appropriate, the name should be one of
> the following choices:
> [...]
>    - flash

I fixed it up and applied the series.

Shawn