OMAP2430 SDP boot broken after Linus' rmk merge

[Santosh Shilimkar]

On Wednesday 24 July 2013 10:20 AM, Will Deacon wrote:
> On Wed, Jul 24, 2013 at 03:17:01PM +0100, Santosh Shilimkar wrote:
>> On Wednesday 24 July 2013 09:56 AM, Will Deacon wrote:
>>> On Tue, Jul 23, 2013 at 10:05:17AM +0100, Rajendra Nayak wrote:
>>>> On Tuesday 23 July 2013 12:37 PM, Paul Walmsley wrote:
>>>>> Hi Rajendra,
>>>>>
>>>>> On Tue, 23 Jul 2013, Rajendra Nayak wrote:
>>>>>
>>>>>> On Tuesday 23 July 2013 01:37 AM, Paul Walmsley wrote:
>>>>>>> On Mon, 22 Jul 2013, Russell King - ARM Linux wrote:
>>>>>>>
>>>>>>>> Bear in mind that I'm almost at the point of not boot-testing anything
>>>>>>>> I sent to Linus because of the uselessness of the SDP4430 board now
>>>>>>>> that it's DT only - the only platform which boot-tests anything I send
>>>>>>>> is the 3430LDP board now.  If people care about that, maybe they can
>>>>>>>> assist with sorting out the issues I've raised on these lists about
>>>>>>>> the SDP4430 - and why the SDP4430 build remains disabled in my build
>>>>>>>> and boot system.
>>>>>>>
>>>>>>> I understand completely...
>>>>>>>
>>>>>>>> Looking at the boot log, it just stops after uboot hands over control.
>>>>>>>> With the lack of output from the decompressor, it's not possible to
>>>>>>>> tell whether it's a decompressor problem or a kernel problem.
>>>>>>>>
>>>>>>>> I think you need to turn on the LL_DEBUG option, select the appropriate
>>>>>>>> output option, and also get the decompressor to use the kernel's debug
>>>>>>>> io functions to output it's stuff (I think the option is DEBUG_UNCOMPRESS).
>>>>>>>
>>>>>>> OK, will dig deeper here at the next opportunity.
>>>>>>
>>>>>> Paul, I can take a look at the 4430sdp issue. Are you also seeing this also on
>>>>>> 2430sdp as the subject says, or was that a typo?
>>>>>
>>>>> Thanks for the offer.  The issue that I'm seeing is on the 2430SDP in my 
>>>>> testbed.
>>>>>
>>>>> I don't have a 4430SDP, so you might consider touching base with rmk for 
>>>>> that one.
>>>>
>>>> So I tried commit 'fb2af00' on the 4430SDP and it did boot fine, though I see
>>>> the below errors. (I am using the mainline bootloaders which do not lock any
>>>> additional DPLLs like USB)
>>>
>>> Any update on this? If it's an issue introduced by architectural changes,
>>> I'd really like to bisect it down but I don't have a board.
>>>
>> From the other thread, RMK did manage to get the board booting finally
>> (uImage related issues, low level debug problem) but with DT only supported
>> build, the audio and DSS was not at same state as before(non-DT build).
>> And then Tony pointed the issues to Peter and Tomy to address it further.
>>
>> Russell,
>> Is above right or I am missing something ?
> 
> I thought that was the 4430 from before the merge window. Ths issue here is
> the 2430 running mainline, as reported by Paul
> 
Actually thread got hijacked a bit when Rajendra replied the OMAP4430
results. I then replied on top of that. Sorry about that

Regards,
Santosh