[PATCH] ARM: dts: Add USB host node for Exynos4

[Jingoo Han]

On Wednesday, July 24, 2013 3:29 PM, Dongjin Kim wrote:
> 
> +Jingoo Han
> 
> Sorry, its my bad. Typo problem.
> 
> I found another patch same with mine,
> https://patchwork.kernel.org/patch/2628451, submitted by Jingoo Han
> and tested on Exynos4210. Mine is tested on Exynos4412. Both SoC have
> same USB host address space, so I think USB host device nodes can be
> placed in exynos4.dtsi.

OK, USB host device nodes can be placed in exynos4.dtsi.

However, next time, please leave comment on earlier patch.
The patch for Exynos4210 USB was already submitted 2 months ago.


> 
> Regards,
> Dongjin.
> 
> On Wed, Jul 24, 2013 at 12:38 PM, Sachin Kamat <sachin.kamat at linaro.org> wrote:
> > On 23 July 2013 23:02, Dongjin Kim <tobetter at gmail.com> wrote:
> >> This patch adds EHCI and OHCI host device nodes for Exynos4.
> >>
> >> Signed-off-by: Dongjin Kim <tobetter at gmail.com>
> >> ---
> >>  arch/arm/boot/dts/exynos4.dtsi |   20 ++++++++++++++++++++
> >>  1 file changed, 20 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> >> index 3f94fe8..1cdbf89 100644
> >> --- a/arch/arm/boot/dts/exynos4.dtsi
> >> +++ b/arch/arm/boot/dts/exynos4.dtsi
> >> @@ -155,6 +155,26 @@
> >>                 status = "disabled";
> >>         };
> >>
> >> +       ehci at 12580000 {
> >> +               compatible = "samsung,exynos4210-ehci";
> >> +               reg = <0x12580000 0x100>;
> >> +               interrupts = <0 70 0>;
> >> +               status = "disabled";
> >> +
> >> +               clocks = <&clock 304>;
> >> +               clock-names = "usbhost";
> >> +       };
> >> +
> >> +       ohci at 12590000 {
> >> +               compatible = "samsung,exynos4210-ohci";
> >> +               reg = <0x12580000 0x100>;
> >
> > Register value and node name do not match. Typo?
> >
> >
> >> +               interrupts = <0 70 0>;
> >> +               status = "disabled";
> >> +
> >> +               clocks = <&clock 304>;
> >> +               clock-names = "usbhost";
> >> +       };
> >> +
> >>         mfc: codec at 13400000 {
> >>                 compatible = "samsung,mfc-v5";
> >>                 reg = <0x13400000 0x10000>;
> >> --
> >> 1.7.9.5