[PATCH] ARM: dts: Add USBPHY nodes to Exynos4x12

[Dongjin Kim]

Thanks Sachin,

On Wed, Jul 24, 2013 at 2:12 PM, Sachin Kamat <sachin.kamat at linaro.org> wrote:
> Hi Dongjin,
>
> On 23 July 2013 23:01, Dongjin Kim <tobetter at gmail.com> wrote:
>> This patch adds device nodes for USBPHY to Exynos4x12.
>>
>> Signed-off-by: Dongjin Kim <tobetter at gmail.com>
>> ---
>>  arch/arm/boot/dts/exynos4x12.dtsi |   18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
>> index 01da194..9c3335b 100644
>> --- a/arch/arm/boot/dts/exynos4x12.dtsi
>> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
>> @@ -73,4 +73,22 @@
>>                 clock-names = "sclk_fimg2d", "fimg2d";
>>                 status = "disabled";
>>         };
>> +
>> +       usbphy at 125B00000 {
>
> Extra 0 above.
>
This is my bad, I will fix.

>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               compatible = "samsung,exynos4x12-usb2phy";
>> +               reg = <0x125B0000 0x100>;
>> +               ranges;
>> +
>> +               clocks = <&clock 2>, <&clock 305>;
>> +               clock-names = "xusbxti", "otg";
>> +               status = "disabled";
>> +
>> +               usbphy-sys {
>> +                       /* USB device and host PHY_CONTROL registers */
>> +                       reg = <0x10020704 0xc>,
>> +                             <0x1001021c 0x4>;
>> +               };
>> +       };
>>  };
>
> Please add this node after tmu node (satisfies alphabetical order as
> well as increasing address value)
No tmu node in exynos4x12.dtsi in mainline v3.11-rc2 yet, even in
Kukjin's branch.

>
>
> --
> With warm regards,
> Sachin