OMAP2430 SDP boot broken after Linus' rmk merge

[Rajendra Nayak]

On Tuesday 23 July 2013 01:37 AM, Paul Walmsley wrote:
> On Mon, 22 Jul 2013, Russell King - ARM Linux wrote:
> 
>> Bear in mind that I'm almost at the point of not boot-testing anything
>> I sent to Linus because of the uselessness of the SDP4430 board now
>> that it's DT only - the only platform which boot-tests anything I send
>> is the 3430LDP board now.  If people care about that, maybe they can
>> assist with sorting out the issues I've raised on these lists about
>> the SDP4430 - and why the SDP4430 build remains disabled in my build
>> and boot system.
> 
> I understand completely...
> 
>> Looking at the boot log, it just stops after uboot hands over control.
>> With the lack of output from the decompressor, it's not possible to
>> tell whether it's a decompressor problem or a kernel problem.
>>
>> I think you need to turn on the LL_DEBUG option, select the appropriate
>> output option, and also get the decompressor to use the kernel's debug
>> io functions to output it's stuff (I think the option is DEBUG_UNCOMPRESS).
> 
> OK, will dig deeper here at the next opportunity.

Paul, I can take a look at the 4430sdp issue. Are you also seeing this also on
2430sdp as the subject says, or was that a typo?

> 
> 
> - Paul
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>