[PATCH v2 1/8] clk: mux: Add support for read-only muxes.

[Tomasz Figa]

Some platforms have read-only clock muxes that are preconfigured at
reset and cannot be changed at runtime. This patch extends mux clock
driver to allow handling such read-only muxes by adding new
CLK_MUX_READ_ONLY mux flag.

Signed-off-by: Tomasz Figa <tomasz.figa at gmail.com>
---
 drivers/clk/clk-mux.c        | 10 +++++++++-
 include/linux/clk-provider.h |  2 ++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 614444c..92f1a1b 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -107,6 +107,11 @@ const struct clk_ops clk_mux_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
+const struct clk_ops clk_mux_ro_ops = {
+	.get_parent = clk_mux_get_parent,
+};
+EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
+
 struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
@@ -133,7 +138,10 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
 	}
 
 	init.name = name;
-	init.ops = &clk_mux_ops;
+	if (clk_mux_flags & CLK_MUX_READ_ONLY)
+		init.ops = &clk_mux_ro_ops;
+	else
+		init.ops = &clk_mux_ops;
 	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 1ec14a7..9487b96 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -327,8 +327,10 @@ struct clk_mux {
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 #define CLK_MUX_HIWORD_MASK		BIT(2)
+#define CLK_MUX_READ_ONLY	BIT(3) /* mux setting cannot be changed */
 
 extern const struct clk_ops clk_mux_ops;
+extern const struct clk_ops clk_mux_ro_ops;
 
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
-- 
1.8.3.2