[PATCH v2 2/2] ARM: shmobile: BOCK-W: enable DMA for SDHI0

Sergei Shtylyov sergei.shtylyov at cogentembedded.com
Mon Jul 22 18:23:24 EDT 2013


From: Max Filippov <max.filippov at cogentembedded.com>

Pass HPB-DMA slave IDs in the SDHI0 platform data to enable DMA in the SDHI
driver.

Signed-off-by: Max Filippov <max.filippov at cogentembedded.com>
[Sergei: removed #include <mach/dma.h>]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
Changes in version 2:
- removed #include <mach/dma.h>;
- refreshed the patch.

 arch/arm/mach-shmobile/board-bockw.c |    2 ++
 1 file changed, 2 insertions(+)

Index: renesas/arch/arm/mach-shmobile/board-bockw.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c
+++ renesas/arch/arm/mach-shmobile/board-bockw.c
@@ -81,6 +81,8 @@ static struct rcar_phy_platform_data usb
 
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,



More information about the linux-arm-kernel mailing list