[PATCH 11/11] ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference

[Simon Horman]

From: Magnus Damm <damm at opensource.se>

Add support for the SMSC ethernet controller found
on the KZM9D board to the KZM9D DT Reference code.

Signed-off-by: Magnus Damm <damm at opensource.se>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/emev2-kzm9d-reference.dts | 31 +++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
index 5ec065e..bed676b 100644
--- a/arch/arm/boot/dts/emev2-kzm9d-reference.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
@@ -23,4 +23,35 @@
 	chosen {
 		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
 	};
+
+	reg_1p8v: regulator at 0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator at 1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220 at 20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
 };
-- 
1.8.2.1