[PATCH] ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN

Paul Walmsley paul at pwsan.com
Mon Jul 22 01:29:35 EDT 2013

From: Lokesh Vutla <lokeshvutla at ti.com>

On 37xx EVM non-dt boot fails with current mainline,
because of broken GPIO numbering in the board file
that uses hardcoded GPIOs.

So marking omap3_evm_display_init() with CONFIG_BROKEN
for now as suggested by Tony as per the below link:

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Tested-by: Paul Walmsley <paul at pwsan.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>


Hi -stablers,

OMAP37xx EVM does not boot on v3.10 without this patch, so please consider 
it for the v3.10 stable releases.  It is upstream already as commit ID 
8fb61e8d84e673eebf31e564a83bb71a50b1ed48.  Perhaps if I had managed to 
test it sooner, we could have gotten it up during v3.10-rc, but, alas, 
stable it is...

 arch/arm/mach-omap2/board-omap3evm.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f76d0de..278bf25 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -174,6 +174,7 @@ static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
 	.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
 static void __init omap3_evm_display_init(void)
 	int r;
@@ -193,6 +194,7 @@ static void __init omap3_evm_display_init(void)
 		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
 static struct omap_dss_device omap3_evm_lcd_device = {
 	.name			= "lcd",
@@ -715,7 +717,9 @@ static void __init omap3_evm_init(void)
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap_twl4030_audio_init("omap3evm", NULL);

To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

More information about the linux-arm-kernel mailing list