[PATCH 2/2] ARCH: ARM: shmobile: Remove ag5evm board support
Simon Horman
horms+renesas at verge.net.au
Mon Jul 22 00:04:55 EDT 2013
Remove support for the sh73a0 based ag5evm board.
The sh73a0 SoC is continued to be supported using
the kzm9g board.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/configs/ag5evm_defconfig | 83 -----
arch/arm/mach-shmobile/Kconfig | 7 -
arch/arm/mach-shmobile/Makefile | 1 -
arch/arm/mach-shmobile/Makefile.boot | 1 -
arch/arm/mach-shmobile/board-ag5evm.c | 639 ----------------------------------
5 files changed, 731 deletions(-)
delete mode 100644 arch/arm/configs/ag5evm_defconfig
delete mode 100644 arch/arm/mach-shmobile/board-ag5evm.c
diff --git a/arch/arm/configs/ag5evm_defconfig b/arch/arm/configs/ag5evm_defconfig
deleted file mode 100644
index 212ead3..0000000
--- a/arch/arm/configs/ag5evm_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_AG5EVM=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 734c21b..5436cc2 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -71,13 +71,6 @@ config ARCH_EMEV2
comment "SH-Mobile Board Type"
-config MACH_AG5EVM
- bool "AG5EVM board"
- depends on ARCH_SH73A0
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SH_LCD_MIPI_DSI
-
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 3cf1e7f..7550774 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,7 +35,6 @@ obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o
obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
# Board objects
-obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index fa96899..563829b 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,6 +1,5 @@
# per-board load address for uImage
loadaddr-y :=
-loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
deleted file mode 100644
index f6d6449..0000000
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ /dev/null
@@ -1,639 +0,0 @@
-/*
- * arch/arm/mach-shmobile/board-ag5evm.c
- *
- * Copyright (C) 2010 Takashi Yoshii <yoshii.takashi.zj at renesas.com>
- * Copyright (C) 2009 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_sci.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/videodev2.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-#include <linux/platform_data/bd6107.h>
-#include <linux/sh_clk.h>
-#include <linux/irqchip/arm-gic.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-#include <sound/sh_fsi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc9220_resources[] = {
- [0] = {
- .start = 0x14000000,
- .end = 0x14000000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
- .name = "smsc911x",
- .id = 0,
- .dev = {
- .platform_data = &smsc9220_platdata,
- },
- .resource = smsc9220_resources,
- .num_resources = ARRAY_SIZE(smsc9220_resources),
-};
-
-static struct sh_keysc_info keysc_platdata = {
- .mode = SH_KEYSC_MODE_6,
- .scan_timing = 3,
- .delay = 100,
- .keycodes = {
- KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
- KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
- KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
- KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
- KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
- KEY_COFFEE,
- KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
- KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
- KEY_COMPUTER,
- },
-};
-
-static struct resource keysc_resources[] = {
- [0] = {
- .name = "KEYSC",
- .start = 0xe61b0000,
- .end = 0xe61b0098 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(71),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device keysc_device = {
- .name = "sh_keysc",
- .id = 0,
- .num_resources = ARRAY_SIZE(keysc_resources),
- .resource = keysc_resources,
- .dev = {
- .platform_data = &keysc_platdata,
- },
-};
-
-/* FSI A */
-static struct resource fsi_resources[] = {
- [0] = {
- .name = "FSI",
- .start = 0xEC230000,
- .end = 0xEC230400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(146),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi2",
- .id = -1,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .name = "MMCIF",
- .start = 0xe6bd0000,
- .end = 0xe6bd00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(141),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = gic_spi(140),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
- .sup_pclk = 0,
- .ocr = MMC_VDD_165_195,
- .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh_mmcif_platdata,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
- [0] = {
- .start = 0xE6D00000,
- .end = 0xE6D01FD4 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = gic_spi(95),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device irda_device = {
- .name = "sh_irda",
- .id = 0,
- .resource = irda_resources,
- .num_resources = ARRAY_SIZE(irda_resources),
-};
-
-/* MIPI-DSI */
-static struct resource mipidsi0_resources[] = {
- [0] = {
- .name = "DSI0",
- .start = 0xfeab0000,
- .end = 0xfeab3fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "DSI0",
- .start = 0xfeab4000,
- .end = 0xfeab7fff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
- void __iomem *base,
- int enable)
-{
- struct clk *pck, *phy;
- int ret;
-
- pck = clk_get(&pdev->dev, "dsip_clk");
- if (IS_ERR(pck)) {
- ret = PTR_ERR(pck);
- goto sh_mipi_set_dot_clock_pck_err;
- }
-
- phy = clk_get(&pdev->dev, "dsiphy_clk");
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- goto sh_mipi_set_dot_clock_phy_err;
- }
-
- if (enable) {
- clk_set_rate(pck, clk_round_rate(pck, 24000000));
- clk_set_rate(phy, clk_round_rate(pck, 510000000));
- clk_enable(pck);
- clk_enable(phy);
- } else {
- clk_disable(pck);
- clk_disable(phy);
- }
-
- ret = 0;
-
- clk_put(phy);
-sh_mipi_set_dot_clock_phy_err:
- clk_put(pck);
-sh_mipi_set_dot_clock_pck_err:
- return ret;
-}
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
- .data_format = MIPI_RGB888,
- .channel = LCDC_CHAN_MAINLCD,
- .lane = 2,
- .vsynw_offset = 20,
- .clksrc = 1,
- .flags = SH_MIPI_DSI_HSABM |
- SH_MIPI_DSI_SYNC_PULSES_MODE |
- SH_MIPI_DSI_HSbyteCLK,
- .set_dot_clock = sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
- .name = "sh-mipi-dsi",
- .num_resources = ARRAY_SIZE(mipidsi0_resources),
- .resource = mipidsi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &mipidsi0_info,
- },
-};
-
-/* LCDC0 and backlight */
-static const struct fb_videomode lcdc0_modes[] = {
- {
- .name = "R63302(QHD)",
- .xres = 544,
- .yres = 961,
- .left_margin = 72,
- .right_margin = 600,
- .hsync_len = 16,
- .upper_margin = 8,
- .lower_margin = 8,
- .vsync_len = 2,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
- .clock_source = LCDC_CLK_PERIPHERAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .interface_type = RGB24,
- .clock_divider = 1,
- .flags = LCDC_FLAGS_DWPOL,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .lcd_modes = lcdc0_modes,
- .num_modes = ARRAY_SIZE(lcdc0_modes),
- .panel_cfg = {
- .width = 44,
- .height = 79,
- },
- .tx_dev = &mipidsi0_device,
- }
-};
-
-static struct resource lcdc0_resources[] = {
- [0] = {
- .name = "LCDC0",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe943fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc0_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc0_resources),
- .resource = lcdc0_resources,
- .id = 0,
- .dev = {
- .platform_data = &lcdc0_info,
- .coherent_dma_mask = ~0,
- },
-};
-
-static struct bd6107_platform_data backlight_data = {
- .fbdev = &lcdc0_device.dev,
- .reset = 235,
- .def_value = 0,
-};
-
-static struct i2c_board_info backlight_board_info = {
- I2C_BOARD_INFO("bd6107", 0x6d),
- .platform_data = &backlight_data,
-};
-
-/* Fixed 2.8V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply fixed2v8_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED,
- .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .cd_gpio = 251,
-};
-
-static struct resource sdhi0_resources[] = {
- [0] = {
- .name = "SDHI0",
- .start = 0xee100000,
- .end = 0xee1000ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
- .start = gic_spi(83),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = gic_spi(84),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = gic_spi(85),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .id = 0,
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .dev = {
- .platform_data = &sdhi0_info,
- },
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply cn4_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn4_power_init_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cn4_power_consumers),
- .consumer_supplies = cn4_power_consumers,
-};
-
-static struct fixed_voltage_config cn4_power_info = {
- .supply_name = "CN4 SD/MMC Vdd",
- .microvolts = 3300000,
- .gpio = 114,
- .enable_high = 1,
- .init_data = &cn4_power_init_data,
-};
-
-static struct platform_device cn4_power = {
- .name = "reg-fixed-voltage",
- .id = 2,
- .dev = {
- .platform_data = &cn4_power_info,
- },
-};
-
-static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
-{
- static int power_gpio = -EINVAL;
-
- if (power_gpio < 0) {
- int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
- "sdhi1_power");
- if (!ret)
- power_gpio = 114;
- }
-
- /*
- * If requesting the GPIO above failed, it means, that the regulator got
- * probed and grabbed the GPIO, but we don't know, whether the sdhi
- * driver already uses the regulator. If it doesn't, we have to toggle
- * the GPIO ourselves, even though it is now owned by the fixed
- * regulator driver. We have to live with the race in case the driver
- * gets unloaded and the GPIO freed between these two steps.
- */
- gpio_set_value(114, state);
-}
-
-static struct sh_mobile_sdhi_info sh_sdhi1_info = {
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
- .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
- .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .set_pwr = ag5evm_sdhi1_set_pwr,
-};
-
-static struct resource sdhi1_resources[] = {
- [0] = {
- .name = "SDHI1",
- .start = 0xee120000,
- .end = 0xee1200ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
- .start = gic_spi(87),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = gic_spi(88),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = gic_spi(89),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi1_device = {
- .name = "sh_mobile_sdhi",
- .id = 1,
- .dev = {
- .platform_data = &sh_sdhi1_info,
- },
- .num_resources = ARRAY_SIZE(sdhi1_resources),
- .resource = sdhi1_resources,
-};
-
-static struct platform_device *ag5evm_devices[] __initdata = {
- &cn4_power,
- ð_device,
- &keysc_device,
- &fsi_device,
- &mmc_device,
- &irda_device,
- &mipidsi0_device,
- &lcdc0_device,
- &sdhi0_device,
- &sdhi1_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map ag5evm_pinctrl_map[] = {
- /* FSIA */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
- "fsia_mclk_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
- "fsia_sclk_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
- "fsia_data_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
- "fsia_data_out", "fsia"),
- /* I2C2 & I2C3 */
- PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0",
- "i2c2_0", "i2c2"),
- PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
- "i2c3_0", "i2c3"),
- /* IrDA */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0",
- "irda_0", "irda"),
- /* KEYSC */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_in8", "keysc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_out04", "keysc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_out5", "keysc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_out6_0", "keysc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_out7_0", "keysc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_out8_0", "keysc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_out9_2", "keysc"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
- "keysc_in8", pin_pullup_conf),
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
- "mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
- "PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
- "mmc0_data8_0", pin_pullup_conf),
- /* SCIFA2 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
- "scifa2_data_0", "scifa2"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
- "scifa2_ctrl_0", "scifa2"),
- /* SDHI0 (CN15 [SD I/F]) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
- "sdhi0_wp", "sdhi0"),
- /* SDHI1 (CN4 [WLAN I/F]) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
- "sdhi1_data4", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
- "sdhi1_ctrl", "sdhi1"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
- "sdhi1_data4", pin_pullup_conf),
- PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
- "PORT263", pin_pullup_conf),
-};
-
-static void __init ag5evm_init(void)
-{
- regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
- ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
- regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
- ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
- regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- pinctrl_register_mappings(ag5evm_pinctrl_map,
- ARRAY_SIZE(ag5evm_pinctrl_map));
- sh73a0_pinmux_init();
-
- /* enable MMCIF */
- gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
-
- /* enable SMSC911X */
- gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
- gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
-
- /* LCD panel */
- gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
- mdelay(1);
- gpio_set_value(217, 1);
- mdelay(100);
-
-
-#ifdef CONFIG_CACHE_L2X0
- /* Shared attribute override enable, 64K*8way */
- l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
-#endif
- sh73a0_add_standard_devices();
-
- i2c_register_board_info(1, &backlight_board_info, 1);
-
- platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
-}
-
-MACHINE_START(AG5EVM, "ag5evm")
- .smp = smp_ops(sh73a0_smp_ops),
- .map_io = sh73a0_map_io,
- .init_early = sh73a0_add_early_devices,
- .nr_irqs = NR_IRQS_LEGACY,
- .init_irq = sh73a0_init_irq,
- .init_machine = ag5evm_init,
- .init_late = shmobile_init_late,
- .init_time = sh73a0_earlytimer_init,
-MACHINE_END
--
1.8.2.1
More information about the linux-arm-kernel
mailing list