[PATCH] ASoC: tegra: correct playback_dma_data setup

[Lucas Stach]

Am Sonntag, den 21.07.2013, 10:34 +0800 schrieb Richard Zhao:
> The errors were caused by copy/paste mistake in below commit
> since v3.10:
> 3489d50 ASoC: tegra: Use common DAI DMA data struct
> 
> It also corrects slave_id initialization in tegra20_ac97 driver.
> 
> Signed-off-by: Richard Zhao <rizhao at nvidia.com>
> Cc: Lars-Peter Clausen <lars at metafoo.de>
> Cc: <stable at vger.kernel.org> # 3.10

Acked-by: Lucas Stach <dev at lynxeye.de>

> ---
>  sound/soc/tegra/tegra20_ac97.c  | 6 +++---
>  sound/soc/tegra/tegra20_spdif.c | 4 ++--
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/sound/soc/tegra/tegra20_ac97.c b/sound/soc/tegra/tegra20_ac97.c
> index e58233f..6c48662 100644
> --- a/sound/soc/tegra/tegra20_ac97.c
> +++ b/sound/soc/tegra/tegra20_ac97.c
> @@ -389,9 +389,9 @@ static int tegra20_ac97_platform_probe(struct platform_device *pdev)
>  	ac97->capture_dma_data.slave_id = of_dma[1];
>  
>  	ac97->playback_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_TX1;
> -	ac97->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> -	ac97->capture_dma_data.maxburst = 4;
> -	ac97->capture_dma_data.slave_id = of_dma[0];
> +	ac97->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	ac97->playback_dma_data.maxburst = 4;
> +	ac97->playback_dma_data.slave_id = of_dma[1];
>  
>  	ret = tegra_asoc_utils_init(&ac97->util_data, &pdev->dev);
>  	if (ret)
> diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
> index 5eaa12c..551b3c9 100644
> --- a/sound/soc/tegra/tegra20_spdif.c
> +++ b/sound/soc/tegra/tegra20_spdif.c
> @@ -323,8 +323,8 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
>  	}
>  
>  	spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
> -	spdif->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> -	spdif->capture_dma_data.maxburst = 4;
> +	spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +	spdif->playback_dma_data.maxburst = 4;
>  	spdif->playback_dma_data.slave_id = dmareq->start;
>  
>  	pm_runtime_enable(&pdev->dev);