[PATCH] ASoC: tegra: correct playback_dma_data setup
Richard Zhao
rizhao at nvidia.com
Sat Jul 20 22:34:09 EDT 2013
The errors were caused by copy/paste mistake in below commit
since v3.10:
3489d50 ASoC: tegra: Use common DAI DMA data struct
It also corrects slave_id initialization in tegra20_ac97 driver.
Signed-off-by: Richard Zhao <rizhao at nvidia.com>
Cc: Lars-Peter Clausen <lars at metafoo.de>
Cc: <stable at vger.kernel.org> # 3.10
---
sound/soc/tegra/tegra20_ac97.c | 6 +++---
sound/soc/tegra/tegra20_spdif.c | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/tegra/tegra20_ac97.c b/sound/soc/tegra/tegra20_ac97.c
index e58233f..6c48662 100644
--- a/sound/soc/tegra/tegra20_ac97.c
+++ b/sound/soc/tegra/tegra20_ac97.c
@@ -389,9 +389,9 @@ static int tegra20_ac97_platform_probe(struct platform_device *pdev)
ac97->capture_dma_data.slave_id = of_dma[1];
ac97->playback_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_TX1;
- ac97->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- ac97->capture_dma_data.maxburst = 4;
- ac97->capture_dma_data.slave_id = of_dma[0];
+ ac97->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ ac97->playback_dma_data.maxburst = 4;
+ ac97->playback_dma_data.slave_id = of_dma[1];
ret = tegra_asoc_utils_init(&ac97->util_data, &pdev->dev);
if (ret)
diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
index 5eaa12c..551b3c9 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -323,8 +323,8 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
}
spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
- spdif->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- spdif->capture_dma_data.maxburst = 4;
+ spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ spdif->playback_dma_data.maxburst = 4;
spdif->playback_dma_data.slave_id = dmareq->start;
pm_runtime_enable(&pdev->dev);
--
1.8.1.5
More information about the linux-arm-kernel
mailing list