[PATCH 6/6] ARM: dts: imx27-phytec-phycore-som: Fix regulator settings

[Alexander Shiyan]

Outputs regulator SW1A and SW1A, SW2A and SW2B are connected together,
so it determined as "joined" operation for MC13783. Separate work of
these outputs in this case would be wrong, so we define only one of
the outputs.
Additionally, define the full range of voltages for the CPU (1.2v - 1.52v).

Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
 arch/arm/boot/dts/imx27-phytec-phycore-som.dts | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index 22d0d27..aa70ad7 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -38,28 +38,16 @@
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {
-			sw1a_reg: sw1a {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
 				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
-			sw1b_reg: sw1b {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2a_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2b_reg: sw2b {
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
-- 
1.8.1.5