[PATCH v2 16/24] net: can: mscan: make mpc512x code use common clock

[Marc Kleine-Budde]

On 07/18/2013 10:20 PM, Gerhard Sittig wrote:
> extend the mscan(4) driver with alternative support for the COMMON_CLK
> approach which is an option in the MPC512x platform, keep the existing
> clock support implementation in place since the driver is shared with
> other MPC5xxx SoCs which don't have common clock support
> 
> one byproduct of this change is that the CAN driver no longer needs to
> access the SoC's clock control registers, which shall be the domain of
> the platform's clock driver
> 
> Signed-off-by: Gerhard Sittig <gsi at denx.de>
> ---
>  drivers/net/can/mscan/mpc5xxx_can.c |  139 +++++++++++++++++++++++++++++++++++
>  1 file changed, 139 insertions(+)
> 
> diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
> index bc422ba..dd26ab6 100644
> --- a/drivers/net/can/mscan/mpc5xxx_can.c
> +++ b/drivers/net/can/mscan/mpc5xxx_can.c
> @@ -108,6 +108,143 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
>  #endif /* CONFIG_PPC_MPC52xx */
>  
>  #ifdef CONFIG_PPC_MPC512x
> +
> +#if IS_ENABLED(CONFIG_COMMON_CLK)
> +
> +static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
> +				 const char *clock_source, int *mscan_clksrc)
> +{
> +	struct device_node *np;
> +	u32 clockdiv;
> +	enum {
> +		CLK_FROM_AUTO,
> +		CLK_FROM_IPS,
> +		CLK_FROM_SYS,
> +		CLK_FROM_REF,
> +	} clk_from;
> +	struct clk *clk_in, *clk_can;
> +	unsigned long freq_calc;
> +
> +	/* the caller passed in the clock source spec that was read from
> +	 * the device tree, get the optional clock divider as well
> +	 */
> +	np = ofdev->dev.of_node;
> +	clockdiv = 1;
> +	of_property_read_u32(np, "fsl,mscan-clock-divider", &clockdiv);
> +	dev_dbg(&ofdev->dev, "device tree specs: clk src[%s] div[%d]\n",
> +		clock_source ? clock_source : "<NULL>", clockdiv);
> +
> +	/* when clock-source is 'ip', the CANCTL1[CLKSRC] bit needs to
> +	 * get set, and the 'ips' clock is the input to the MSCAN
> +	 * component
> +	 *
> +	 * for clock-source values of 'ref' or 'sys' the CANCTL1[CLKSRC]
> +	 * bit needs to get cleared, an optional clock-divider may have
> +	 * been specified (the default value is 1), the appropriate
> +	 * MSCAN related MCLK is the input to the MSCAN component
> +	 *
> +	 * in the absence of a clock-source spec, first an optimal clock
> +	 * gets determined based on the 'sys' clock, if that fails the
> +	 * 'ref' clock is used
> +	 */
> +	clk_from = CLK_FROM_AUTO;
> +	if (clock_source) {
> +		/* interpret the device tree's spec for the clock source */
> +		if (!strcmp(clock_source, "ip"))
> +			clk_from = CLK_FROM_IPS;
> +		else if (!strcmp(clock_source, "sys"))
> +			clk_from = CLK_FROM_SYS;
> +		else if (!strcmp(clock_source, "ref"))
> +			clk_from = CLK_FROM_REF;
> +		else
> +			goto err_invalid;
> +		dev_dbg(&ofdev->dev, "got a clk source spec[%d]\n", clk_from);
> +	}
> +	if (clk_from == CLK_FROM_AUTO) {
> +		/* no spec so far, try the 'sys' clock; round to the
> +		 * next MHz and see if we can get a multiple of 16MHz
> +		 */
> +		dev_dbg(&ofdev->dev, "no clk source spec, trying SYS\n");
> +		clk_in = clk_get(&ofdev->dev, "sys");
> +		if (IS_ERR(clk_in))
> +			goto err_notavail;
> +		freq_calc = clk_get_rate(clk_in);
> +		freq_calc +=  499999;
> +		freq_calc /= 1000000;
> +		freq_calc *= 1000000;
> +		if ((freq_calc % 16000000) == 0) {
> +			clk_from = CLK_FROM_SYS;
> +			clockdiv = freq_calc / 16000000;
> +			dev_dbg(&ofdev->dev,
> +				"clk fit, sys[%lu] div[%d] freq[%lu]\n",
> +				freq_calc, clockdiv, freq_calc / clockdiv);
> +		}
> +	}
> +	if (clk_from == CLK_FROM_AUTO) {
> +		/* no spec so far, use the 'ref' clock */
> +		dev_dbg(&ofdev->dev, "no clk source spec, trying REF\n");
> +		clk_in = clk_get(&ofdev->dev, "ref");
> +		if (IS_ERR(clk_in))
> +			goto err_notavail;
> +		clk_from = CLK_FROM_REF;
> +		freq_calc = clk_get_rate(clk_in);
> +		dev_dbg(&ofdev->dev,
> +			"clk fit, ref[%lu] (no div) freq[%lu]\n",
> +			freq_calc, freq_calc);
> +	}
> +
> +	/* select IPS or MCLK as the MSCAN input (returned to the caller),
> +	 * setup the MCLK mux source and rate if applicable, apply the
> +	 * optionally specified or derived above divider, and determine
> +	 * the actual resulting clock rate to return to the caller
> +	 */
> +	switch (clk_from) {
> +	case CLK_FROM_IPS:
> +		clk_can = clk_get(&ofdev->dev, "ips");
> +		if (IS_ERR(clk_can))
> +			goto err_notavail;
> +		clk_prepare_enable(clk_can);

Where is the corresponding clk_disable_unprepare()?a

> +		freq_calc = clk_get_rate(clk_can);
> +		*mscan_clksrc = MSCAN_CLKSRC_IPS;
> +		dev_dbg(&ofdev->dev, "clk from IPS, clksrc[%d] freq[%lu]\n",
> +			*mscan_clksrc, freq_calc);
> +		break;
> +	case CLK_FROM_SYS:
> +	case CLK_FROM_REF:
> +		clk_can = clk_get(&ofdev->dev, "mclk");
> +		if (IS_ERR(clk_can))
> +			goto err_notavail;
> +		clk_prepare_enable(clk_can);

dito

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130719/2115e02f/attachment.sig>