[PATCH v2 19/24] USB: fsl-mph-dr-of: OF clock lookup, prepare and enable

[Gerhard Sittig]

device tree based clock lookup in the MPC512x initialization (lookup
'per' for register access), add error check in the clock setup, must
prepare clocks before they can get enabled, unprepare after disable

Signed-off-by: Gerhard Sittig <gsi at denx.de>
---
 drivers/usb/host/fsl-mph-dr-of.c |   24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 11e0b79..eb564f3 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -260,25 +260,19 @@ int fsl_usb2_mpc5121_init(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
 	struct clk *clk;
-	char clk_name[10];
-	int base, clk_num;
-
-	base = pdev->resource->start & 0xf000;
-	if (base == 0x3000)
-		clk_num = 1;
-	else if (base == 0x4000)
-		clk_num = 2;
-	else
-		return -ENODEV;
+	int err;
 
-	snprintf(clk_name, sizeof(clk_name), "usb%d_clk", clk_num);
-	clk = clk_get(&pdev->dev, clk_name);
+	clk = clk_get(&pdev->dev, "per");
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clk\n");
 		return PTR_ERR(clk);
 	}
-
-	clk_enable(clk);
+	err = clk_prepare_enable(clk);
+	if (err) {
+		dev_err(&pdev->dev, "failed to enable clk\n");
+		clk_put(clk);
+		return err;
+	}
 	pdata->clk = clk;
 
 	if (pdata->phy_mode == FSL_USB2_PHY_UTMI_WIDE) {
@@ -303,7 +297,7 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
 	pdata->regs = NULL;
 
 	if (pdata->clk) {
-		clk_disable(pdata->clk);
+		clk_disable_unprepare(pdata->clk);
 		clk_put(pdata->clk);
 	}
 }
-- 
1.7.10.4