[PATCH] ARM: omap2: fix musb usage for n8x0

[Stefan Roese]

On 07/18/2013 02:02 PM, Daniel Mack wrote:
> On 18.07.2013 11:40, Stefan Roese wrote:
>> On 07/18/2013 11:18 AM, Kishon Vijay Abraham I wrote:
>>>> I'm testing musb as OTG on beagleboard (old one, not Beagle-xm). And
>>>> using the latest kernel.org version with this patch applied I see the
>>>> following messages while booting (repeatedly):
>>>>
>>>> [    4.998168] usb usb1: bus auto-suspend, wakeup 1
>>>> [    5.003112] musb_bus_suspend 2457: trying to suspend as b_idle while active
>>>> [    5.010498] usb usb1: bus suspend fail, err -16
>>>> [    5.015289] hub 1-0:1.0: hub_resume
>>>> [    5.019073] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
>>>> [    5.024963] hub 1-0:1.0: hub_suspend
>>>> [    5.028778] usb usb1: bus auto-suspend, wakeup 1
>>>> ...
>>>>
>>>> This is without a cable connected to the OTG port.
>>>>
>>>> Any ideas what might be missing here?
>>>
>>> Even I observed these prints when I have dual mode enabled. When kept as gadget
>>> only mode I dint see these prints.
>>
>> Yes. With gadget-only I don't see those messages. Thanks for the hint.
> 
> So in which mode does your port operate then? Gadget or dual-role?

Its the original Beagleboard (revision C2), so I suppose its dual-role.
Or am I mistaken here?

> And I
> take it this does not happen with 3.10?

I just checked v3.10 as again. No, I'm not seeing these messages here.

Thanks,
Stefan