[PATCH 3/4] ARM: dts: i.MX53: split esdhc2 pins into base and 8bit groups
Sascha Hauer
s.hauer at pengutronix.de
Thu Jul 18 03:46:10 EDT 2013
This splits the esdhc2 groups into a base group and an 8bit extension
which results in smaller devicetrees and more obvious pinctrl group
names.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boot/dts/imx53-smd.dts | 2 +-
arch/arm/boot/dts/imx53-tqma53.dtsi | 2 +-
arch/arm/boot/dts/imx53.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index a8fb844..74d34872 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -48,7 +48,7 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2_base_1>;
non-removable;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index abd72af..82b0bd8 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -35,7 +35,7 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>,
+ pinctrl-0 = <&pinctrl_esdhc2_base_1>,
<&pinctrl_tqma53_esdhc2_2>;
vmmc-supply = <®_3p3v>;
wp-gpios = <&gpio1 2 0>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 6e317766..bfbeaef 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -477,7 +477,7 @@
};
esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
+ pinctrl_esdhc2_base_1: esdhc2-basegrp-1 {
fsl,pins = <
MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
--
1.8.3.2
More information about the linux-arm-kernel
mailing list