[PATCH v2 20/42] ARM: at91: move at91sam9x5 SoCs to new at91 clk implem

Boris BREZILLON b.brezillon at overkiz.com
Wed Jul 17 10:53:20 EDT 2013


This patch removes all references to the old at91 clks for at91sam9x5 SoCs.
These SoCs only supports dt boards: we can remove register_clocks
(all clocks are defined in dt).

Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
---
 arch/arm/mach-at91/at91sam9x5.c |  291 ---------------------------------------
 1 file changed, 291 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 9fdea07..583a3d5 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -19,299 +19,9 @@
 #include "board.h"
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioAB_clk = {
-	.name		= "pioAB_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOAB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCD_clk = {
-	.name		= "pioCD_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOCD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk smd_clk = {
-	.name		= "smd_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SMD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* USART3 clock - Only for sam9g25/sam9x25 */
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi2_clk = {
-	.name		= "twi2_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart0_clk = {
-	.name		= "uart0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UART0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart1_clk = {
-	.name		= "uart1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UART1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
-	.name		= "tcb0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_PWM,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
-	.type	= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_op_clk = {
-	.name		= "adc_op_clk",
-	.type		= CLK_TYPE_PERIPHERAL,
-	.rate_hz	= 5000000,
-};
-static struct clk dma0_clk = {
-	.name		= "dma0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
-	.type	= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma1_clk = {
-	.name		= "dma1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
-	.name		= "uhphs",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UHPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
-static struct clk macb0_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* isi clock - Only for sam9g25 */
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* emac1 clock - Only for sam9x25 */
-static struct clk macb1_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
-	.name		= "ssc_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* can0 clock - Only for sam9x35 */
-static struct clk can0_clk = {
-	.name		= "can0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* can1 clock - Only for sam9x35 */
-static struct clk can1_clk = {
-	.name		= "can1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioAB_clk,
-	&pioCD_clk,
-	&smd_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&twi2_clk,
-	&mmc0_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&uart0_clk,
-	&uart1_clk,
-	&tcb0_clk,
-	&pwm_clk,
-	&adc_clk,
-	&adc_op_clk,
-	&dma0_clk,
-	&dma1_clk,
-	&uhphs_clk,
-	&udphs_clk,
-	&mmc1_clk,
-	&ssc_clk,
-	// irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
-	CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
-	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk),
-	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
-	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
-	CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
-	/* additional fake clock for macb_hclk */
-	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
-	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
-	CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9x5_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-
-	if (cpu_is_at91sam9g25()
-	|| cpu_is_at91sam9x25())
-		clk_register(&usart3_clk);
-
-	if (cpu_is_at91sam9g25()
-	|| cpu_is_at91sam9x25()
-	|| cpu_is_at91sam9g35()
-	|| cpu_is_at91sam9x35())
-		clk_register(&macb0_clk);
-
-	if (cpu_is_at91sam9g15()
-	|| cpu_is_at91sam9g35()
-	|| cpu_is_at91sam9x35())
-		clk_register(&lcdc_clk);
-
-	if (cpu_is_at91sam9g25())
-		clk_register(&isi_clk);
-
-	if (cpu_is_at91sam9x25())
-		clk_register(&macb1_clk);
-
-	if (cpu_is_at91sam9x25()
-	|| cpu_is_at91sam9x35()) {
-		clk_register(&can0_clk);
-		clk_register(&can1_clk);
-	}
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-
-/* --------------------------------------------------------------------
  *  AT91SAM9x5 processor initialization
  * -------------------------------------------------------------------- */
 
@@ -326,5 +36,4 @@ static void __init at91sam9x5_map_io(void)
 
 AT91_SOC_START(at91sam9x5)
 	.map_io = at91sam9x5_map_io,
-	.register_clocks = at91sam9x5_register_clocks,
 AT91_SOC_END
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list