[RFC PATCH v2 14/15] cpufreq: pmac64-cpufreq: remove device tree parsing for cpu nodes
Sudeep.KarkadaNagesha at arm.com
Sudeep.KarkadaNagesha at arm.com
Wed Jul 17 10:06:23 EDT 2013
From: Sudeep KarkadaNagesha <sudeep.karkadanagesha at arm.com>
Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.
This patch removes all DT parsing and uses cpu->of_node instead.
Cc: Viresh Kumar <viresh.kumar at linaro.org>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha at arm.com>
---
drivers/cpufreq/pmac64-cpufreq.c | 54 ++++++++++++++--------------------------
1 file changed, 18 insertions(+), 36 deletions(-)
diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c
index 7ba4234..b60ccea 100644
--- a/drivers/cpufreq/pmac64-cpufreq.c
+++ b/drivers/cpufreq/pmac64-cpufreq.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
+#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/completion.h>
@@ -383,9 +384,8 @@ static struct cpufreq_driver g5_cpufreq_driver = {
#ifdef CONFIG_PMAC_SMU
-static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
+static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
{
- struct device_node *cpunode;
unsigned int psize, ssize;
unsigned long max_freq;
char *freq_method, *volt_method;
@@ -405,20 +405,6 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
else
return -ENODEV;
- /* Get first CPU node */
- for (cpunode = NULL;
- (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
- const u32 *reg = of_get_property(cpunode, "reg", NULL);
- if (reg == NULL || (*reg) != 0)
- continue;
- if (!strcmp(cpunode->type, "cpu"))
- break;
- }
- if (cpunode == NULL) {
- printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
- return -ENODEV;
- }
-
/* Check 970FX for now */
valp = of_get_property(cpunode, "cpu-version", NULL);
if (!valp) {
@@ -537,9 +523,9 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
#endif /* CONFIG_PMAC_SMU */
-static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
+static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
{
- struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
+ struct device_node *cpuid = NULL, *hwclock = NULL;
const u8 *eeprom = NULL;
const u32 *valp;
u64 max_freq, min_freq, ih, il;
@@ -548,17 +534,6 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
" RackMac3,1...\n");
- /* Get first CPU node */
- for (cpunode = NULL;
- (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
- if (!strcmp(cpunode->type, "cpu"))
- break;
- }
- if (cpunode == NULL) {
- printk(KERN_ERR "cpufreq: Can't find any CPU node\n");
- return -ENODEV;
- }
-
/* Lookup the cpuid eeprom node */
cpuid = of_find_node_by_path("/u3 at 0,f8000000/i2c at f8001000/cpuid at a0");
if (cpuid != NULL)
@@ -718,25 +693,32 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
static int __init g5_cpufreq_init(void)
{
- struct device_node *cpus;
+ struct device *cpu_dev;
+ struct device_node *cpunode;
int rc = 0;
- cpus = of_find_node_by_path("/cpus");
- if (cpus == NULL) {
- DBG("No /cpus node !\n");
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("failed to get cpu device\n");
+ return -ENODEV;
+ }
+
+ /* Get first CPU node */
+ cpunode = of_node_get(cpu_dev->of_node);
+ if (cpunode == NULL) {
+ pr_err("cpufreq: Can't find any CPU node\n");
return -ENODEV;
}
if (of_machine_is_compatible("PowerMac7,2") ||
of_machine_is_compatible("PowerMac7,3") ||
of_machine_is_compatible("RackMac3,1"))
- rc = g5_pm72_cpufreq_init(cpus);
+ rc = g5_pm72_cpufreq_init(cpunode);
#ifdef CONFIG_PMAC_SMU
else
- rc = g5_neo2_cpufreq_init(cpus);
+ rc = g5_neo2_cpufreq_init(cpunode);
#endif /* CONFIG_PMAC_SMU */
- of_node_put(cpus);
return rc;
}
--
1.8.1.2
More information about the linux-arm-kernel
mailing list