[PATCH v3 2/7] mmc: atmel-mci: prepare clk before calling enable

[Russell King - ARM Linux]

On Tue, Jul 16, 2013 at 05:06:48PM +0200, Boris BREZILLON wrote:
> @@ -389,9 +391,13 @@ static int atmci_regs_show(struct seq_file *s, void *v)
>  	 * consistent.
>  	 */
>  	spin_lock_bh(&host->lock);
> -	clk_enable(host->mck);
> +	ret = clk_prepare_enable(host->mck);
> +	if (ret) {
> +		spin_unlock_bh(&host->lock);
> +		goto out;
> +	}

NAK.  This is buggy.  clk_prepare() can sleep.  Calling clk_prepare()
even via clk_prepare_enable() is a blatent bug.

>  	memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
> -	clk_disable(host->mck);
> +	clk_disable_unprepare(host->mck);
>  	spin_unlock_bh(&host->lock);

Now, given that the CLK API counts enables/disables, having the spin lock
around the clk API calls is utterly pointless.  This should be:

	ret = clk_prepare_enable(host->mck);
	if (ret)
		goto out;

	spin_lock_bh(&host->lock);
	memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
	spin_unlock_bh(&host->lock);

	clk_disable_unprepare(host->mclk);

or, if you really need to have the clock enabled/disabled within the
spinlock (very very very unlikely):

	ret = clk_prepare(host->mck);
	if (ret)
		goto out;

	spin_lock_bh(&host->lock);
	ret = clk_enable(host->mck);
	if (ret == 0) {
		memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
		clk_disable(host->mck);
	}
	spin_unlock_bh(&host->lock);

	clk_unprepare(host->mclk);
	if (ret)
		goto out;

> @@ -1279,7 +1286,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  
>  		spin_lock_bh(&host->lock);
>  		if (!host->mode_reg) {
> -			clk_enable(host->mck);
> +			clk_prepare_enable(host->mck);

Again, buggy - calling clk_prepare beneath a spinlock is illegal.