[PATCH] phy: micrel: Add definitions for common Micrel PHY registers

[Nicolas Ferre]

On 16/07/2013 01:08, dinguyen at altera.com :
> From: Dinh Nguyen <dinguyen at altera.com>
>
> Add defines for common Micrel PHY setups so that other platforms
> can use them. Update imx61 and sama5 hardware to use the micrel_phy.h
> PHY defines.
>
> Also add support for the KSZ9021RLRN PHY.
>
> Signed-off-by: Dinh Nguyen <dinguyen at altera.com>
> Cc: David S. Miller <davem at davemloft.net>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> CC: Andrew Victor <linux at maxim.org.za>
> CC: Nicolas Ferre <nicolas.ferre at atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

BTW, which way do you plan to use to merge it upstream?

Thanks a lot, bye,

> CC: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
> CC: Pavel Machek <pavel at denx.de>
> ---
>   arch/arm/mach-at91/board-dt-sama5.c |   17 ++++++-----------
>   arch/arm/mach-imx/mach-imx6q.c      |   13 ++++++++-----
>   include/linux/micrel_phy.h          |    6 ++++++
>   3 files changed, 20 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
> index ad95f6a..bf00d15 100644
> --- a/arch/arm/mach-at91/board-dt-sama5.c
> +++ b/arch/arm/mach-at91/board-dt-sama5.c
> @@ -42,20 +42,15 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy)
>   {
>   	int value;
>
> -#define GMII_RCCPSR	260
> -#define GMII_RRDPSR	261
> -#define GMII_ERCR	11
> -#define GMII_ERDWR	12
> -
>   	/* Set delay values */
> -	value = GMII_RCCPSR | 0x8000;
> -	phy_write(phy, GMII_ERCR, value);
> +	value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
> +	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
>   	value = 0xF2F4;
> -	phy_write(phy, GMII_ERDWR, value);
> -	value = GMII_RRDPSR | 0x8000;
> -	phy_write(phy, GMII_ERCR, value);
> +	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
> +	value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
> +	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
>   	value = 0x2222;
> -	phy_write(phy, GMII_ERDWR, value);
> +	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
>
>   	return 0;
>   }
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 7be13f8..c8d7814 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -103,13 +103,16 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
>   {
>   	if (IS_BUILTIN(CONFIG_PHYLIB)) {
>   		/* min rx data delay */
> -		phy_write(phydev, 0x0b, 0x8105);
> -		phy_write(phydev, 0x0c, 0x0000);
> +		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
> +			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
> +		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
>
>   		/* max rx/tx clock delay, min rx/tx control delay */
> -		phy_write(phydev, 0x0b, 0x8104);
> -		phy_write(phydev, 0x0c, 0xf0f0);
> -		phy_write(phydev, 0x0b, 0x104);
> +		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
> +			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
> +		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
> +		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
> +			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
>   	}
>
>   	return 0;
> diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
> index 8752dbb..ad05ce6 100644
> --- a/include/linux/micrel_phy.h
> +++ b/include/linux/micrel_phy.h
> @@ -17,6 +17,7 @@
>
>   #define PHY_ID_KSZ8873MLL	0x000e7237
>   #define PHY_ID_KSZ9021		0x00221610
> +#define PHY_ID_KSZ9021RLRN	0x00221611
>   #define PHY_ID_KS8737		0x00221720
>   #define PHY_ID_KSZ8021		0x00221555
>   #define PHY_ID_KSZ8031		0x00221556
> @@ -35,4 +36,9 @@
>   /* struct phy_device dev_flags definitions */
>   #define MICREL_PHY_50MHZ_CLK	0x00000001
>
> +#define MICREL_KSZ9021_EXTREG_CTRL	0xB
> +#define MICREL_KSZ9021_EXTREG_DATA_WRITE	0xC
> +#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW	0x104
> +#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW	0x105
> +
>   #endif /* _MICREL_PHY_H */
>


-- 
Nicolas Ferre