[PATCH rebased 2/2] ARM: dts: imx6qdl-sabreauto: add a DT node for uart3

[Huang Shijie]

Add a DT node for uart3, in the imx6q{dl}-sabreauto boards,
the uart3 is used by Bluetooth.

Since the uart3 has pin conflict with gpmi and weim nor, we keep it
disabled by default.

Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 365e8ff..70a8bf1 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -67,6 +67,15 @@
 	};
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	fsl,uart-has-rtscts;
+	dma-names = "rx", "tx";
+	dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+	status = "disabled"; /* used by the BT, pin conflict with gpmi and weim NOR */
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
-- 
1.7.1