[PATCH v12 06/13] usb: chipidea: add otg_cap attribute for otg capable

[Peter Chen]

On Thu, Jul 11, 2013 at 05:36:10PM +0200, Marek Vasut wrote:
> Dear Peter Chen,
> 
> > Since we need otgsc to know vbus's status at some chipidea
> > controllers even it is peripheral-only mode. Besides, some
> > SoCs (eg, AR9331 SoC) don't have otgsc register even
> > the DCCPARAMS_DC and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS.
> > We inroduce otg_cap attribute to indicate if the controller
> > is otg capable, defaultly, we follow the rule that if DCCPARAMS_DC
> > and DCCPARAMS_HC are both 1 at CAP_DCCPARAMS are otg capable, but if there
> > is exception, the platform can override it by device tree or platform data.
> > 
> > Signed-off-by: Peter Chen <peter.chen at freescale.com>
> > ---
> >  drivers/usb/chipidea/core.c  |   35 ++++++++++++++++++++++++++++-------
> >  include/linux/usb/chipidea.h |   13 +++++++++++++
> >  2 files changed, 41 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> > index 93961ff..e8ceb04 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -405,6 +405,18 @@ static inline void ci_role_destroy(struct ci_hdrc *ci)
> >  	ci_hdrc_host_destroy(ci);
> >  }
> > 
> > +static void ci_get_otg_capable(struct ci_hdrc *ci)
> > +{
> > +	if (ci->platdata->otg_cap != OTG_CAP_ATTR_IS_NOT_EXISTED)
> 
> IS_NONEXISTENT , no?
> 

You mean the English for this string? ok, I can change.
It means if the "otg_cap" is not existed at platform data,
then, the "otg_cap" can be determined by DCCPARAMS

-- 

Best Regards,
Peter Chen