Boot hang regression 3.10.0-rc4 -> 3.10.0

Suman Anna s-anna at ti.com
Thu Jul 11 20:40:47 EDT 2013


On 07/11/2013 04:59 AM, Grygorii Strashko wrote:
> Hi,
> 
> On 07/11/2013 09:32 AM, Tony Lindgren wrote:
>> * Felipe Balbi <balbi at ti.com> [130710 09:18]:
>>>
>>> On Wed, Jul 10, 2013 at 07:07:04PM +0300, Felipe Balbi wrote:
>>>> how about something like below ? It makes omap_device/hwmod and
>>>> pm_runtime agree on the initial state of the device and will prevent
>>>> ->runtime_resume() from being called on first pm_runtime_get*() done
>>>> during probe.
>>>>
>>>> This is similar to what PCI bus does (if you look at pci_pm_init()).
>>>>
>>>> commit 59108a500b4ab4b1a5102648a3360276dbf7df6f
>>>> Author: Felipe Balbi <balbi at ti.com>
>>>> Date:   Wed Jul 10 18:50:16 2013 +0300
>>>>
>>>>      arm: omap2plus: unidle devices which are about to probe
>>>>
>>>>      in order to make HWMOD and pm_runtime agree on the
>>>>      initial state of the device, we will unidle the device
>>>>      and call pm_runtime_set_active() to tell pm_runtime
>>>>      that the device is really active.
> Don't think that it's good idea (
> I've checked some driver's and think this patch will enable some devices
> unpredictably:
> - hwspinlock
> - mailbox
> - iommu
> - ipu
> All above devices need to be enabled on demand only (no
> pm_runtime_get*() calls in probe). More over, some of them have very
> specific enabling sequence - like ipu).
> 
> May be Summan can say more on that.

Indeed, this is a problem for any of the slave processor devices.
mailbox and iommu would be slaves to the remoteproc and the drivers have
a specific sequence of bringing up a processor. The current
hwmod/omap_device code is such that these devices will be left in reset
and the driver code use the omap_device_(de)assert_hardreset API
together with omap_device_enable code to bring up the devices. The
remoteproc driver also needs to assert the resets (there are other
problems associated with using omap_device_idle for remoteproc and
iommu) for bringing up the devices after a suspend sequence. hwspinlock
and mailbox may get away since they are in CORE domain, but definitely
an issue for iommu and remoteproc. I would think that this would also
affect other compute devices like IVAHD, ISS, SGX.

regards
Suman

> 
>>>>
>>>>      By the time driver's probe() is reached, a call to
>>>>      pm_runtime_get_sync() will not cause driver's
>>>>      ->runtime_resume() method to be called at first, only
>>>>      after a successful ->runtime_suspend().
>>>>
>>>>      Signed-off-by: Felipe Balbi <balbi at ti.com>
>>>
>>> btw, this is RFC, haven't tested at all.
>>
>> Yes it does not compile, then removing the extra ; at the end
>> of the functions, it oopses with a NULL pointer exception.
>>
>> Regards,
>>
>> Tony
>> -- 
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
> 




More information about the linux-arm-kernel mailing list