[PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx

[Roger Quadros]

On 07/11/2013 01:45 PM, Stefan Roese wrote:
> Hi Roger,
> 
> On 07/11/2013 12:24 PM, Roger Quadros wrote:
>> Stefan,
>>
>> I tried it out today and it worked 5/5 times. I used a bare bones
>> debian root filesystem for
>> the NFS root.
> 
> Thanks for testing.
> 
>> Could it be possible that the boot scripts on your filesystem are
>> somehow shutting down
>> the ethernet interface? Might be worth checking on a fresh filesystem.
> 
> I'm pretty sure that its not a problem with the filesystem. I'm using
> exactly this filesystem for multiple other ARM based boards as well.
> And all other boards (most of them with buildin ethernet controller
> instead of USB connected) have no problem mounting/booting from it.

OK, then it might be something to do with beagle.
Is pandaboard working fine for you?

> 
> BTW: The filesystem is from the ELDK 5.3 [1][2]. You could download/install
> it yourself.

OK. Will give it a try.
> 
> From your log I can see, that you are using a slightly different board
> than I am ("Beagle xM Rev C" vs. "Beagle Rev C1/C2/C3"). So its a

My board is a C2.

> different OMAP variant. Could this perhaps make a difference? Do you
> by chance have the "old" Beagleboard (non-xM) at hand for another test?

Sure. I have the old beagleboard with me. Let me know what to test.

cheers,
-roger