Boot hang regression 3.10.0-rc4 -> 3.10.0

[Grygorii Strashko]

On 07/11/2013 12:17 PM, Rajendra Nayak wrote:
> On Wednesday 10 July 2013 09:37 PM, Felipe Balbi wrote:
>> how about something like below ? It makes omap_device/hwmod and
>> pm_runtime agree on the initial state of the device and will prevent
>> ->runtime_resume() from being called on first pm_runtime_get*() done
>> during probe.
>>
>> This is similar to what PCI bus does (if you look at pci_pm_init()).
>
> I tried something similar [1] but what I found is that the serial
> runtime resume was called despite it being marked as active using
> pm_runtime_set_active().
>
> That seems to be because of the pm_runtime_set_autosuspend_delay()
> because we have the autosuspend_delay = -1
>
> -----
> static void update_autosuspend(struct device *dev, int old_delay, int old_use)
> {
>          int delay = dev->power.autosuspend_delay;
>
>          /* Should runtime suspend be prevented now? */
>          if (dev->power.use_autosuspend && delay < 0) {
>
>                  /* If it used to be allowed then prevent it. */
>                  if (!old_use || old_delay >= 0) {
>                          atomic_inc(&dev->power.usage_count);
>                          rpm_resume(dev, 0); <------------------------------- calls serial runtime resume.
It's strange - the check for status is inside rpm_resume()

if (dev->power.runtime_status == RPM_ACTIVE) {
		retval = 1;
		goto out;
	}

So, if status is set to RPM_ACTIVE before first call to:
  pm_runtime_use_autosuspend(&pdev->dev);
  pm_runtime_set_autosuspend_delay(&pdev->dev,
			omap_up_info->autosuspend_timeout);
-- or --
  pm_runtime_get*()
everything should be ok.

May be the problem is inside serial_omap_set_termios() where 
pm_runtime_get_sync is called before context is initialized.
probe:
  get - status is ACTIVE and serial resume is not called
  put - status is IDLE

set_termios
  get - status is IDLE and serial resume is called


>                  }
>          }
> -----
>
> So we end up with the same issue with serial resume being called before set_termios()
>
> [1]
>
> diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
> index 5cc9287..c71d47d 100644
> --- a/arch/arm/mach-omap2/omap_device.c
> +++ b/arch/arm/mach-omap2/omap_device.c
> @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
>          struct device_node *node = pdev->dev.of_node;
>          const char *oh_name;
>          int oh_cnt, i, ret = 0;
> +       bool device_active = false;
>
>          oh_cnt = of_property_count_strings(node, "ti,hwmods");
>          if (oh_cnt <= 0) {
> @@ -152,6 +153,9 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
>                          goto odbfd_exit1;
>                  }
>                  hwmods[i] = oh;
> +               if (oh->flags & HWMOD_INIT_NO_IDLE)
> +                       device_active = true;
> +
>          }
>
>          od = omap_device_alloc(pdev, hwmods, oh_cnt);
> @@ -172,6 +176,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
>
>          pdev->dev.pm_domain = &omap_device_pm_domain;
>
> +       if (device_active) {
> +               omap_device_enable(pdev);
> +               pm_runtime_set_active(&pdev->dev);
> +       }
> +
>   odbfd_exit1:
>          kfree(hwmods);
>   odbfd_exit:
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>