[PATCH 4/6] mfd: omap-usb-host: Put pins in IDLE state on suspend
Roger Quadros
rogerq at ti.com
Wed Jul 10 12:23:00 EDT 2013
In order to support wake up from suspend use the pinctrl
framework to put the USB host pins in IDLE state during suspend.
CC: Samuel Ortiz <sameo at linux.intel.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
drivers/mfd/omap-usb-host.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index fb2b3d8..3734d16 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -31,6 +31,7 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/err.h>
+#include <linux/pinctrl/consumer.h>
#include "omap-usb.h"
@@ -111,6 +112,7 @@ struct usbhs_hcd_omap {
struct usbhs_omap_platform_data *pdata;
u32 usbhs_rev;
+ bool no_idle;
};
/*-------------------------------------------------------------------------*/
@@ -325,6 +327,7 @@ static int usbhs_runtime_resume(struct device *dev)
dev_dbg(dev, "usbhs_runtime_resume\n");
+ pinctrl_pm_select_default_state(dev);
omap_tll_enable(pdata);
if (!IS_ERR(omap->ehci_logic_fck))
@@ -378,6 +381,12 @@ static int usbhs_runtime_suspend(struct device *dev)
dev_dbg(dev, "usbhs_runtime_suspend\n");
+ if (omap->no_idle) {
+ dev_dbg(dev, "%s: Not suspending as IDLE pins not available\n",
+ __func__);
+ return -EBUSY;
+ }
+
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
@@ -401,6 +410,7 @@ static int usbhs_runtime_suspend(struct device *dev)
clk_disable(omap->ehci_logic_fck);
omap_tll_disable(pdata);
+ pinctrl_pm_select_idle_state(dev);
return 0;
}
@@ -608,6 +618,14 @@ static int usbhs_omap_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ if (!dev->pins || !dev->pins->idle_state) {
+ /* If IDLE pins are not available, we can't remote wakeup,
+ * so prevent idling in that case.
+ */
+ omap->no_idle = true;
+ dev_info(dev, "No IDLE pins so runtime idle disabled\n");
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
omap->uhh_base = devm_ioremap_resource(dev, res);
if (IS_ERR(omap->uhh_base))
@@ -796,6 +814,8 @@ static int usbhs_omap_probe(struct platform_device *pdev)
}
}
+ pinctrl_pm_select_default_state(dev);
+
return 0;
err_alloc:
@@ -872,6 +892,8 @@ static int usbhs_omap_remove(struct platform_device *pdev)
/* remove children */
device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
+ pinctrl_pm_select_idle_state(&pdev->dev);
+
return 0;
}
--
1.7.4.1
More information about the linux-arm-kernel
mailing list