[PATCH v2 2/2] iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver

Oleksandr Kozaruk oleksandr.kozaruk at ti.com
Wed Jul 10 03:08:54 EDT 2013


The GPADC is general purpose ADC found on TWL6030,
and TWL6032 PMIC, known also as Phoenix and PhoenixLite.

The TWL6030 and TWL6032 have GPADC with 17 and 19
channels respectively. Some channels have current
source and are used for measuring voltage drop
on resistive load for detecting battery ID resistance,
or measuring voltage drop on NTC resistors for external
temperature measurements. Some channels measure voltage,
(i.e. battery voltage), and have voltage dividers,
thus, capable to scale voltage. Some channels are dedicated
for measuring die temperature.

Some channels are calibrated in 2 points, having
offsets from ideal values kept in trim registers. This
is used to correct measurements.

The differences between GPADC in TWL6030 and TWL6032:
- 10 bit vs 12 bit ADC;
- 17 vs 19 channels;
- channels have different purpose(i. e. battery voltage
  channel 8 vs channel 18);
- trim values are interpreted differently.

The driver exports function returning converted value for
requested channels.

Based on the driver patched from Balaji TK, Graeme Gregory, Ambresh K,
Girish S Ghongdemath.

Signed-off-by: Balaji T K <balajitk at ti.com>
Graeme Gregory <gg at slimlogic.co.uk>
Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk at ti.com>
---
 drivers/iio/adc/Kconfig         |    8 +
 drivers/iio/adc/Makefile        |    1 +
 drivers/iio/adc/twl6030-gpadc.c | 1019 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 1028 insertions(+)
 create mode 100644 drivers/iio/adc/twl6030-gpadc.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index ab0767e6..87d699e 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -157,4 +157,12 @@ config VIPERBOARD_ADC
 	  Say yes here to access the ADC part of the Nano River
 	  Technologies Viperboard.
 
+config TWL6030_GPADC
+	tristate "TWL6030 GPADC (General Purpose A/D Convertor) Support"
+	depends on TWL4030_CORE
+	default n
+	help
+	  Say yes here if you want support for the TWL6030 General Purpose
+	  A/D Convertor.
+
 endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 0a825be..8b05633 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
+obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
new file mode 100644
index 0000000..d9529a9
--- /dev/null
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -0,0 +1,1019 @@
+/*
+ * TWL6030 GPADC module driver
+ *
+ * Copyright (C) 2009-2013 Texas Instruments Inc.
+ * Nishant Kamat <nskamat at ti.com>
+ * Balaji T K <balajitk at ti.com>
+ * Graeme Gregory <gg at slimlogic.co.uk>
+ * Girish S Ghongdemath <girishsg at ti.com>
+ * Ambresh K <ambresh at ti.com>
+ * Oleksandr Kozaruk <oleksandr.kozaruk at ti.com
+ *
+ * Based on twl4030-madc.c
+ * Copyright (C) 2008 Nokia Corporation
+ * Mikko Ylinen <mikko.k.ylinen at nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/i2c/twl.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define DRIVER_NAME		"twl6030_gpadc"
+
+#define TWL6030_GPADC_MAX_CHANNELS 17
+#define TWL6032_GPADC_MAX_CHANNELS 19
+/* Define this as the biggest of all chips using this driver */
+#define GPADC_MAX_CHANNELS TWL6032_GPADC_MAX_CHANNELS
+
+#define TWL6030_GPADC_CTRL			0x00    /* 0x2e */
+#define TWL6030_GPADC_CTRL2			0x01	/* 0x2f */
+
+#define TWL6030_GPADC_CTRL_P1			0x05
+#define TWL6030_GPADC_CTRL_P2			0x06
+
+#define TWL6032_GPADC_GPSELECT_ISB		0x07
+#define TWL6032_GPADC_CTRL_P1			0x08
+
+#define TWL6032_GPADC_RTCH0_LSB			0x09
+#define TWL6032_GPADC_RTCH0_MSB			0x0a
+#define TWL6032_GPADC_RTCH1_LSB			0x0b
+#define TWL6032_GPADC_RTCH1_MSB			0x0c
+#define TWL6032_GPADC_GPCH0_LSB			0x0d
+#define TWL6032_GPADC_GPCH0_MSB			0x0e
+
+#define TWL6030_GPADC_CTRL_P1_SP1		BIT(3)
+#define TWL6030_GPADC_CTRL_P1_EOCRT		BIT(2)
+#define TWL6030_GPADC_CTRL_P1_EOCP1		BIT(1)
+#define TWL6030_GPADC_CTRL_P1_BUSY		BIT(0)
+
+#define TWL6030_GPADC_CTRL_P2_SP2		BIT(2)
+#define TWL6030_GPADC_CTRL_P2_EOCP2		BIT(1)
+#define TWL6030_GPADC_CTRL_P1_BUSY		BIT(0)
+
+#define TWL6030_GPADC_EOC_SW			BIT(1)
+#define TWL6030_GPADC_BUSY			BIT(0)
+
+#define TWL6030_GPADC_RTCH0_LSB			(0x07)
+#define TWL6030_GPADC_GPCH0_LSB			(0x29)
+
+/* Fixed channels */
+#define TWL6030_GPADC_CTRL_TEMP1_EN		BIT(0)    /* input ch 1 */
+#define TWL6030_GPADC_CTRL_TEMP2_EN		BIT(1)    /* input ch 4 */
+#define TWL6030_GPADC_CTRL_SCALER_EN		BIT(2)    /* input ch 2 */
+#define TWL6030_GPADC_CTRL_SCALER_DIV4		BIT(3)
+#define TWL6030_GPADC_CTRL_SCALER_EN_CH11	BIT(4)    /* input ch 11 */
+#define TWL6030_GPADC_CTRL_TEMP1_EN_MONITOR	BIT(5)
+#define TWL6030_GPADC_CTRL_TEMP2_EN_MONITOR	BIT(6)
+#define TWL6030_GPADC_CTRL_ISOURCE_EN		BIT(7)
+
+#define TWL6030_GPADC_CTRL2_REMSENSE_0		BIT(0)
+#define TWL6030_GPADC_CTRL2_REMSENSE_1		BIT(1)
+#define TWL6030_GPADC_CTRL2_SCALER_EN_CH18	BIT(2)
+#define TWL6030_GPADC_CTRL2_VBAT_SCALER_DIV4	BIT(3)
+
+#define TWL6030_GPADC_RT_SW1_EOC_MASK		BIT(5)
+#define TWL6030_GPADC_SW2_EOC_MASK		BIT(6)
+
+#define TWL6032_GPADC_RT_EOC_MASK		BIT(4)
+#define TWL6032_GPADC_SW_EOC_MASK		BIT(5)
+
+#define TWL6030_GPADC_TRIM1			0xCD
+
+#define TWL6030_REG_TOGGLE1			0x90
+#define TWL6030_GPADCS				BIT(1)
+#define TWL6030_GPADCR				BIT(0)
+
+/**
+ * struct twl6030_chnl_calib - channel calibration
+ * @gain:		slope coefficient for ideal curve
+ * @gain_error:		gain error
+ * @offset_error:	offset of the real curve
+ */
+struct twl6030_chnl_calib {
+	s32 gain;
+	s32 gain_error;
+	s32 offset_error;
+};
+
+/**
+ * struct twl6030_ideal_code - GPADC calibration parameters
+ * GPADC is calibrated in two points: close to the beginning and
+ * to the and of the measurable input range
+ *
+ * @code1:	ideal code for the input at the beginning
+ * @code2:	ideal code for at the end of the range
+ * @v1:		voltage input at the beginning(low voltage)
+ * @v2:		voltage input at the end(high voltage)
+ */
+struct twl6030_ideal_code {
+	u16 code1;
+	u16 code2;
+	u16 v1;
+	u16 v2;
+};
+
+struct twl6030_gpadc_data;
+
+/**
+ * struct twl6030_gpadc_platform_data - platform specific data
+ * @nchannels:		number of GPADC channels
+ * @iio_channels:	iio channels
+ * @twl6030_ideal:	pointer to calibration parameters
+ * @start_conversion:	pointer to ADC start conversion function
+ * @channel_to_reg	pointer to ADC function to convert channel to
+ * 			register address for reading conversion result
+ * @calibrate:		pointer to calibration function
+ */
+struct twl6030_gpadc_platform_data {
+	const int nchannels;
+	const struct iio_chan_spec *iio_channels;
+	const struct twl6030_ideal_code *ideal;
+	int (*start_conversion)(int channel);
+	u8 (*channel_to_reg)(int channel);
+	int (*calibrate)(struct twl6030_gpadc_data *gpadc);
+};
+
+/**
+ * struct twl6030_gpadc_data - GPADC data
+ * @dev:		device pointer
+ * @lock:		mutual exclusion lock for the structure
+ * @irq_complete:	completion to signal end of conversion
+ * @twl6030_cal_tbl:	pointer to calibration data for each
+ * 			channel with gain error and offset
+ * @pdata:		pointer to device specific data
+ */
+struct twl6030_gpadc_data {
+	struct device	*dev;
+	struct mutex	lock;
+	struct completion	irq_complete;
+	struct twl6030_chnl_calib	*twl6030_cal_tbl;
+	const struct twl6030_gpadc_platform_data *pdata;
+};
+
+/*
+ * channels 11, 12, 13, 15 and 16 have no calibration data
+ * calibration offset is same for channels 1, 3, 4, 5
+ *
+ * The data is taken from GPADC_TRIM registers description.
+ * GPADC_TRIM registers keeps difference between the code measured
+ * at v1 and v2 input voltages and corresponding code1 and code2
+ */
+static const struct twl6030_ideal_code
+	twl6030_ideal[TWL6030_GPADC_MAX_CHANNELS] = {
+	{ /* ch 0, external, battery type, resistor value */
+		.code1 = 116,
+		.code2 = 745,
+		.v1 = 141,
+		.v2 = 910,
+	},
+	{ /* ch 1, external, battery temperature, NTC resistor value */
+		.code1 = 82,
+		.code2 = 900,
+		.v1 = 100,
+		.v2 = 1100,
+	},
+	{ /* ch 2, external, audio accessory/general purpose */
+		.code1 = 55,
+		.code2 = 818,
+		.v1 = 101,
+		.v2 = 1499,
+	},
+	{ /* ch 3, external, general purpose */
+		.code1 = 82,
+		.code2 = 900,
+		.v1 = 100,
+		.v2 = 1100,
+	},
+	{ /* ch 4, external, temperature measurement/general purpose */
+		.code1 = 82,
+		.code2 = 900,
+		.v1 = 100,
+		.v2 = 1100,
+	},
+	{ /* ch 5, external, general purpose */
+		.code1 = 82,
+		.code2 = 900,
+		.v1 = 100,
+		.v2 = 1100,
+	},
+	{ /* ch 6, external, general purpose */
+		.code1 = 82,
+		.code2 = 900,
+		.v1 = 100,
+		.v2 = 1100,
+	},
+	{ /* ch 7, internal, main battery */
+		.code1 = 614,
+		.code2 = 941,
+		.v1 = 3001,
+		.v2 = 4599,
+	},
+	{ /* ch 8, internal, backup battery */
+		.code1 = 82,
+		.code2 = 688,
+		.v1 = 501,
+		.v2 = 4203,
+	},
+	{ /* ch 9, internal, external charger input */
+		.code1 = 182,
+		.code2 = 818,
+		.v1 = 2001,
+		.v2 = 8996,
+	},
+	{ /* ch 10, internal, VBUS */
+		.code1 = 149,
+		.code2 = 818,
+		.v1 = 1001,
+		.v2 = 5497,
+	},
+	{},	/* ch 11, internal, VBUS charging current */
+	{},	/* ch 12, internal, Die temperature */
+	{},	/* ch 13, internal, Die temperature */
+	{ /* ch 14, internal, USB ID line */
+		.code1 = 48,
+		.code2 = 714,
+		.v1 = 323,
+		.v2 = 4800,
+	},
+	{},	/* ch 15, internal, test network */
+	{},	/* ch 16, internal, test network */
+};
+
+static const struct twl6030_ideal_code
+			twl6032_ideal[TWL6032_GPADC_MAX_CHANNELS] = {
+	{ /* ch 0, external, battery type, resistor value */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 1, external, battery temperature, NTC resistor value */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 2, external, audio accessory/general purpose */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 660,
+		.v2 = 1500,
+	},
+	{ /* ch 3, external, temperature with external diode/general purpose */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 4, external, temperature measurement/general purpose */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 5, external, general purpose */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 6, external, general purpose */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch7, internal, system supply */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 2200,
+		.v2 = 5000,
+	},
+	{ /* ch8, internal, backup battery */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 2200,
+		.v2 = 5000,
+	},
+	{ /* ch 9, internal, external charger input */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 3960,
+		.v2 = 9000,
+	},
+	{ /* ch10, internal, VBUS */
+		.code1 = 150,
+		.code2 = 751,
+		.v1 = 1000,
+		.v2 = 5000,
+	},
+	{ /* ch 11, internal, VBUS DC-DC output current */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 660,
+		.v2 = 1500,
+	},
+	{ /* ch 12, internal, Die temperature */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 13, internal, Die temperature */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 440,
+		.v2 = 1000,
+	},
+	{ /* ch 14, internal, USB ID line */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 2420,
+		.v2 = 5500,
+	},
+	{},	/* ch 15, internal, test network */
+	{},	/* ch 16, internal, test network */
+	{},	/* ch 17, internal, battery charging current */
+	{ /* ch 18, internal, battery voltage */
+		.code1 = 1441,
+		.code2 = 3276,
+		.v1 = 2200,
+		.v2 = 5000,
+	},
+};
+
+static inline int twl6030_gpadc_write(u8 reg, u8 val)
+{
+	return twl_i2c_write_u8(TWL6030_MODULE_GPADC, val, reg);
+}
+
+static inline int twl6030_gpadc_read(u8 *val, u8 reg)
+{
+
+	return twl_i2c_read(TWL6030_MODULE_GPADC, val, reg, 2);
+}
+
+static int twl6030_gpadc_enable_irq(u8 mask)
+{
+	int ret;
+
+	ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_LINE_B);
+	ret |= twl6030_interrupt_unmask(mask, REG_INT_MSK_STS_B);
+
+	return ret;
+}
+
+static void twl6030_gpadc_disable_irq(u8 mask)
+{
+	twl6030_interrupt_mask(mask, REG_INT_MSK_LINE_B);
+	twl6030_interrupt_mask(mask, REG_INT_MSK_STS_B);
+}
+
+static irqreturn_t twl6030_gpadc_irq_handler(int irq, void *_gpadc)
+{
+	struct twl6030_gpadc_data *gpadc = _gpadc;
+
+	complete(&gpadc->irq_complete);
+
+	return IRQ_HANDLED;
+}
+
+static int twl6030_start_conversion(int channel)
+{
+	return twl6030_gpadc_write(TWL6030_GPADC_CTRL_P1,
+					TWL6030_GPADC_CTRL_P1_SP1);
+}
+
+static int twl6032_start_conversion(int channel)
+{
+	int ret;
+
+	ret = twl6030_gpadc_write(TWL6032_GPADC_GPSELECT_ISB, channel);
+	if (ret)
+		return ret;
+
+	return twl6030_gpadc_write(TWL6032_GPADC_CTRL_P1,
+						TWL6030_GPADC_CTRL_P1_SP1);
+}
+
+static u8 twl6030_channel_to_reg(int channel)
+{
+	return TWL6030_GPADC_GPCH0_LSB + 2 * channel;
+}
+
+static u8 twl6032_channel_to_reg(int channel)
+{
+	return TWL6032_GPADC_GPCH0_LSB;
+}
+
+static int twl6030_gpadc_get_raw(struct twl6030_gpadc_data *gpadc,
+		int channel, int *res)
+{
+	u8 reg = gpadc->pdata->channel_to_reg(channel);
+	u8 val[2];
+	int ret;
+
+	ret = twl6030_gpadc_read(val, reg);
+	if (ret) {
+		dev_dbg(gpadc->dev, "unable to read register 0x%X\n", reg);
+		return ret;
+	}
+
+	*res = (val[1] << 8) | val[0];
+
+	return ret;
+}
+
+static int twl6030_gpadc_get_processed(struct twl6030_gpadc_data *gpadc,
+		int channel, int *val)
+{
+	int raw_code;
+	int corrected_code;
+	int channel_value;
+	int ret;
+
+	ret = twl6030_gpadc_get_raw(gpadc, channel, &raw_code);
+	if (ret)
+		return ret;
+
+	corrected_code = ((raw_code * 1000) -
+		gpadc->twl6030_cal_tbl[channel].offset_error) /
+		gpadc->twl6030_cal_tbl[channel].gain_error;
+
+	channel_value = corrected_code *
+			gpadc->twl6030_cal_tbl[channel].gain;
+
+	/* Shift back into mV range */
+	channel_value /= 1000;
+
+	dev_dbg(gpadc->dev, "GPADC raw: %d", raw_code);
+	dev_dbg(gpadc->dev, "GPADC cor: %d", corrected_code);
+	dev_dbg(gpadc->dev, "GPADC val: %d", channel_value);
+
+	*val = channel_value;
+
+	return ret;
+}
+
+static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
+			     int *val, int *val2, long mask)
+{
+	struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&gpadc->lock);
+
+	ret = gpadc->pdata->start_conversion(chan->channel);
+	if (ret) {
+		dev_err(gpadc->dev, "failed to start conversion\n", __func__);
+		goto err;
+	}
+	/* wait for conversion to complete */
+	wait_for_completion_interruptible_timeout(&gpadc->irq_complete,
+						msecs_to_jiffies(5000));
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = twl6030_gpadc_get_raw(gpadc, chan->channel, val);
+		ret = ret ? -EIO : IIO_VAL_INT;
+		break;
+
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = twl6030_gpadc_get_processed(gpadc, chan->channel, val);
+		ret = ret ? -EIO : IIO_VAL_INT;
+		break;
+
+	default:
+		break;
+	}
+err:
+	mutex_unlock(&gpadc->lock);
+
+	return ret;
+}
+
+static void twl6030_calibrate_channel(struct twl6030_gpadc_data *gpadc,
+					int channel, int d1, int d2)
+{
+	int b, k, gain, x1, x2;
+	const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal;
+
+	/* Gain */
+	gain = ((ideal[channel].v2 - ideal[channel].v1) * 1000) /
+		(ideal[channel].code2 - ideal[channel].code1);
+
+	x1 = ideal[channel].code1;
+	x2 = ideal[channel].code2;
+
+	/* k */
+	k = 1000 + (((d2 - d1) * 1000) / (x2 - x1));
+
+	/* b */
+	b = (d1 * 1000) - (k - 1000) * x1;
+
+	gpadc->twl6030_cal_tbl[channel].gain = gain;
+	gpadc->twl6030_cal_tbl[channel].gain_error = k;
+	gpadc->twl6030_cal_tbl[channel].offset_error = b;
+
+	dev_dbg(gpadc->dev, "GPADC d1   for Chn: %d = %d\n", channel, d1);
+	dev_dbg(gpadc->dev, "GPADC d2   for Chn: %d = %d\n", channel, d2);
+	dev_dbg(gpadc->dev, "GPADC x1   for Chn: %d = %d\n", channel, x1);
+	dev_dbg(gpadc->dev, "GPADC x2   for Chn: %d = %d\n", channel, x2);
+	dev_dbg(gpadc->dev, "GPADC Gain for Chn: %d = %d\n", channel, gain);
+	dev_dbg(gpadc->dev, "GPADC k    for Chn: %d = %d\n", channel, k);
+	dev_dbg(gpadc->dev, "GPADC b    for Chn: %d = %d\n", channel, b);
+}
+
+static inline int twl6030_gpadc_get_trim_offset(s8 d)
+{
+	int sign;
+
+	/*
+	 * XXX NOTE!
+	 * bit 0 - sign, bit 7 - reserved, 6..1 - trim value
+	 * though, the documentation states that trim value
+	 * is absolute value, the correct conversion results are
+	 * obtained if the value is interpreted as 2's complement.
+	 */
+	sign = d & 1;
+	d = (d & 0x7f) >> 1;
+
+	return sign ? (d | 0xc0) : d;
+}
+
+static int twl6030_calibration(struct twl6030_gpadc_data *gpadc)
+{
+	int ret;
+	int chn;
+	u8 trim_regs[TWL6030_GPADC_MAX_CHANNELS];
+	s8 d1, d2;
+
+	/*
+	 * for calibration two measurements have been performed at
+	 * factory, for some channels, during the production test and
+	 * have been stored in registers. This two stored values are
+	 * used to correct the measurements. The values represent
+	 * offsets for the given input from the output on ideal curve.
+	 */
+	ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs,
+			TWL6030_GPADC_TRIM1, 16);
+	if (ret < 0) {
+		dev_err(gpadc->dev, "calibration failed\n");
+		return ret;
+	}
+
+	for (chn = 0; chn < TWL6030_GPADC_MAX_CHANNELS; chn++) {
+
+		switch (chn) {
+		case 0:
+			d1 = trim_regs[0];
+			d2 = trim_regs[1];
+			break;
+		case 1:
+			d1 = trim_regs[4];
+			d2 = trim_regs[5];
+			break;
+		case 2:
+			d1 = trim_regs[12];
+			d2 = trim_regs[13];
+			break;
+		case 3:
+		case 4:
+		case 5:
+		case 6:
+			d1 = trim_regs[4];
+			d2 = trim_regs[5];
+			break;
+		case 7:
+			d1 = trim_regs[6];
+			d2 = trim_regs[7];
+			break;
+		case 8:
+			d1 = trim_regs[2];
+			d2 = trim_regs[3];
+			break;
+		case 9:
+			d1 = trim_regs[8];
+			d2 = trim_regs[9];
+			break;
+		case 10:
+			d1 = trim_regs[10];
+			d2 = trim_regs[11];
+			break;
+		case 14:
+			d1 = trim_regs[14];
+			d2 = trim_regs[15];
+			break;
+		default:
+			continue;
+		}
+
+		d1 = twl6030_gpadc_get_trim_offset(d1);
+		d2 = twl6030_gpadc_get_trim_offset(d2);
+
+		twl6030_calibrate_channel(gpadc, chn, d1, d2);
+	}
+
+	return 0;
+}
+
+static int twl6032_calibration(struct twl6030_gpadc_data *gpadc)
+{
+	int chn, d1 = 0, d2 = 0, temp;
+	u8 trim_regs[17];
+	int ret;
+
+	ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs + 1,
+			TWL6030_GPADC_TRIM1, 16);
+	if (ret < 0) {
+		dev_err(gpadc->dev, "calibration failed\n");
+		return ret;
+	}
+
+	/* Loop to calculate the value needed for returning voltages from
+	 * GPADC not values.
+	 *
+	 * gain is calculated to 3 decimal places fixed point.
+	 */
+	for (chn = 0; chn < TWL6032_GPADC_MAX_CHANNELS; chn++) {
+
+		switch (chn) {
+		case 0:
+		case 1:
+		case 2:
+		case 3:
+		case 4:
+		case 5:
+		case 6:
+		case 11:
+		case 12:
+		case 13:
+		case 14:
+			/* D1 */
+			d1 = (trim_regs[3] & 0x1F) << 2;
+			d1 |= (trim_regs[1] & 0x06) >> 1;
+			if (trim_regs[1] & 0x01)
+				d1 = -d1;
+
+			/* D2 */
+			d2 = (trim_regs[4] & 0x3F) << 2;
+			d2 |= (trim_regs[2] & 0x06) >> 1;
+			if (trim_regs[2] & 0x01)
+				d2 = -d2;
+			break;
+		case 8:
+			/* D1 */
+			temp = (trim_regs[3] & 0x1F) << 2;
+			temp |= (trim_regs[1] & 0x06) >> 1;
+			if (trim_regs[1] & 0x01)
+				temp = -temp;
+
+			d1 = (trim_regs[8] & 0x18) << 1;
+			d1 |= (trim_regs[7] & 0x1E) >> 1;
+			if (trim_regs[7] & 0x01)
+				d1 = -d1;
+
+			d1 += temp;
+
+			/* D2 */
+			temp = (trim_regs[4] & 0x3F) << 2;
+			temp |= (trim_regs[2] & 0x06) >> 1;
+			if (trim_regs[2] & 0x01)
+				temp = -temp;
+
+			d2 = (trim_regs[10] & 0x1F) << 2;
+			d2 |= (trim_regs[8] & 0x06) >> 1;
+			if (trim_regs[8] & 0x01)
+				d2 = -d2;
+
+			d2 += temp;
+			break;
+		case 9:
+			/* D1 */
+			temp = (trim_regs[3] & 0x1F) << 2;
+			temp |= (trim_regs[1] & 0x06) >> 1;
+			if (trim_regs[1] & 0x01)
+				temp = -temp;
+
+			d1 = (trim_regs[14] & 0x18) << 1;
+			d1 |= (trim_regs[12] & 0x1E) >> 1;
+			if (trim_regs[12] & 0x01)
+				d1 = -d1;
+
+			d1 += temp;
+
+			/* D2 */
+			temp = (trim_regs[4] & 0x3F) << 2;
+			temp |= (trim_regs[2] & 0x06) >> 1;
+			if (trim_regs[2] & 0x01)
+				temp = -temp;
+
+			d2 = (trim_regs[16] & 0x1F) << 2;
+			d2 |= (trim_regs[14] & 0x06) >> 1;
+			if (trim_regs[14] & 0x01)
+				d2 = -d2;
+
+			d2 += temp;
+		case 10:
+			/* D1 */
+			d1 = (trim_regs[11] & 0x0F) << 3;
+			d1 |= (trim_regs[9] & 0x0E) >> 1;
+			if (trim_regs[9] & 0x01)
+				d1 = -d1;
+
+			/* D2 */
+			d2 = (trim_regs[15] & 0x0F) << 3;
+			d2 |= (trim_regs[13] & 0x0E) >> 1;
+			if (trim_regs[13] & 0x01)
+				d2 = -d2;
+			break;
+		case 7:
+		case 18:
+			/* D1 */
+			temp = (trim_regs[3] & 0x1F) << 2;
+			temp |= (trim_regs[1] & 0x06) >> 1;
+			if (trim_regs[1] & 0x01)
+				temp = -temp;
+
+			d1 = (trim_regs[5] & 0x7E) >> 1;
+			if (trim_regs[5] & 0x01)
+				d1 = -d1;
+
+			d1 += temp;
+
+			/* D2 */
+			temp = (trim_regs[4] & 0x3F) << 2;
+			temp |= (trim_regs[2] & 0x06) >> 1;
+			if (trim_regs[2] & 0x01)
+				temp = -temp;
+
+			d2 = (trim_regs[6] & 0xFE) >> 1;
+			if (trim_regs[6] & 0x01)
+				d2 = -d2;
+
+			d2 += temp;
+			break;
+		default:
+			/* No data for other channels */
+			continue;
+		}
+
+		twl6030_calibrate_channel(gpadc, chn, d1, d2);
+	}
+
+	return 0;
+}
+
+#define TWL6030_GPADC_CHAN(chn, chan_info) {		\
+	.type = IIO_VOLTAGE,				\
+	.channel = chn,					\
+	.scan_type = {					\
+		.sign = 'u',				\
+		.storagebits = 16,			\
+	},						\
+	.info_mask = BIT(chan_info),			\
+	.info_mask_separate = BIT(chan_info), 		\
+	.indexed = 1,					\
+}
+
+static const struct iio_chan_spec twl6030_gpadc_iio_channels[] = {
+	TWL6030_GPADC_CHAN(0, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(1, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(2, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(3, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(4, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(5, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(6, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(7, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(8, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(9, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(10, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(11, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(12, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(13, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(14, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(15, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(16, IIO_CHAN_INFO_RAW),
+};
+
+static const struct iio_chan_spec twl6032_gpadc_iio_channels[] = {
+	TWL6030_GPADC_CHAN(0, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(1, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(2, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(3, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(4, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(5, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(6, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(7, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(8, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(9, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(10, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(11, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(12, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(13, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(14, IIO_CHAN_INFO_PROCESSED),
+	TWL6030_GPADC_CHAN(15, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(16, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(17, IIO_CHAN_INFO_RAW),
+	TWL6030_GPADC_CHAN(18, IIO_CHAN_INFO_PROCESSED),
+};
+
+static const struct iio_info twl6030_gpadc_iio_info = {
+	.read_raw = &twl6030_gpadc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static const struct twl6030_gpadc_platform_data twl6030_pdata = {
+	.iio_channels = twl6030_gpadc_iio_channels,
+	.nchannels = TWL6030_GPADC_MAX_CHANNELS,
+	.ideal = twl6030_ideal,
+	.start_conversion = twl6030_start_conversion,
+	.channel_to_reg = twl6030_channel_to_reg,
+	.calibrate = twl6030_calibration,
+};
+
+static const struct twl6030_gpadc_platform_data twl6032_pdata = {
+	.iio_channels = twl6032_gpadc_iio_channels,
+	.nchannels = TWL6032_GPADC_MAX_CHANNELS,
+	.ideal = twl6032_ideal,
+	.start_conversion = twl6032_start_conversion,
+	.channel_to_reg = twl6032_channel_to_reg,
+	.calibrate = twl6032_calibration,
+};
+
+static const struct of_device_id of_twl6030_match_tbl[] = {
+	{
+		.compatible = "ti,twl6030_gpadc",
+		.data = &twl6030_pdata,
+	},
+	{
+		.compatible = "ti,twl6032_gpadc",
+		.data = &twl6032_pdata,
+	},
+	{ /* end */ }
+};
+
+static int twl6030_gpadc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct twl6030_gpadc_data *gpadc;
+	const struct twl6030_gpadc_platform_data *pdata;
+	const struct of_device_id *match;
+	struct iio_dev *indio_dev;
+	int irq;
+	int ret = 0;
+
+	match = of_match_device(of_match_ptr(of_twl6030_match_tbl), dev);
+	pdata = match ? match->data : dev->platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+	indio_dev = iio_device_alloc(sizeof(struct twl6030_gpadc_data));
+	if (!indio_dev) {
+		dev_err(dev, "failed allocating iio device\n");
+		ret = -ENOMEM;
+	}
+
+	gpadc = iio_priv(indio_dev);
+
+	gpadc->twl6030_cal_tbl = devm_kzalloc(dev,
+					sizeof(struct twl6030_chnl_calib) *
+					pdata->nchannels, GFP_KERNEL);
+	if (!gpadc->twl6030_cal_tbl)
+		goto err;
+
+	gpadc->dev = dev;
+	gpadc->pdata = pdata;
+
+	platform_set_drvdata(pdev, indio_dev);
+	mutex_init(&gpadc->lock);
+	init_completion(&gpadc->irq_complete);
+
+	ret = pdata->calibrate(gpadc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to read calibration registers\n");
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		goto err;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, NULL,
+					twl6030_gpadc_irq_handler,
+					IRQF_ONESHOT, "twl6030_gpadc", gpadc);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request irq\n");
+		goto err;
+	}
+
+	ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable GPADC interrupt\n");
+		goto err;
+	}
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS,
+					TWL6030_REG_TOGGLE1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to enable GPADC module\n");
+		goto err;
+	}
+
+	indio_dev->name = DRIVER_NAME;
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &twl6030_gpadc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = pdata->iio_channels;
+	indio_dev->num_channels = pdata->nchannels;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err;
+
+	return ret;
+err:
+	iio_device_free(indio_dev);
+	return ret;
+}
+
+static int twl6030_gpadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK);
+	iio_device_unregister(indio_dev);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static int twl6030_gpadc_suspend(struct device *pdev)
+{
+	int ret;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR,
+				TWL6030_REG_TOGGLE1);
+	if (ret)
+		dev_err(pdev, "error reseting GPADC (%d)!\n", ret);
+
+	return 0;
+};
+
+static int twl6030_gpadc_resume(struct device *pdev)
+{
+	int ret;
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS,
+				TWL6030_REG_TOGGLE1);
+	if (ret)
+		dev_err(pdev, "error setting GPADC (%d)!\n", ret);
+
+	return 0;
+};
+
+static const struct dev_pm_ops twl6030_gpadc_pm_ops = {
+	.suspend = twl6030_gpadc_suspend,
+	.resume = twl6030_gpadc_resume,
+};
+
+static struct platform_driver twl6030_gpadc_driver = {
+	.probe		= twl6030_gpadc_probe,
+	.remove		= twl6030_gpadc_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &twl6030_gpadc_pm_ops,
+		.of_match_table = of_twl6030_match_tbl,
+	},
+};
+
+module_platform_driver(twl6030_gpadc_driver);
+
+MODULE_ALIAS("platform: " DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("twl6030 ADC driver");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list