[PATCH 1/2] ARM: dts: imx6dl-wandboard: Add SDHC1 and SDHC2 ports

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Wandboard has a SD card slot on the baseboard connected to SDHC1 and a
BCM4329 (Wifi + Bluetooth chip) connected to SDHC2.

Add support for these ports.

While at it, provide the card detect gpio on SDHC3.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/boot/dts/imx6dl-wandboard.dts | 17 +++++++++++++++++
 arch/arm/boot/dts/imx6dl.dtsi          | 29 +++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index ab6a053..027ece5 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -83,6 +83,8 @@
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6DL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6DL_PAD_GPIO_2__GPIO1_IO02	0x80000000
+				MX6DL_PAD_EIM_DA9__GPIO3_IO09	0x80000000
 			>;
 		};
 	};
@@ -110,8 +112,23 @@
 	status = "okay";
 };
 
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_2>;
+	cd-gpios = <&gpio1 2 0>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_2>;
+	non-removable;
+	status = "okay";
+};
+
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio3 9 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4505109..e08c54c 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -255,6 +255,35 @@
 					};
 				};
 
+				usdhc1 {
+					pinctrl_usdhc1_1: usdhc1grp-1 {
+						fsl,pins = <
+							MX6DL_PAD_SD1_CMD__SD1_CMD    0x17059
+							MX6DL_PAD_SD1_CLK__SD1_CLK    0x10059
+							MX6DL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+							MX6DL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+							MX6DL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+							MX6DL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+							MX6DL_PAD_NANDF_D0__SD1_DATA4 0x17059
+							MX6DL_PAD_NANDF_D1__SD1_DATA5 0x17059
+							MX6DL_PAD_NANDF_D2__SD1_DATA6 0x17059
+							MX6DL_PAD_NANDF_D3__SD1_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc1_2: usdhc1grp-2 {
+						fsl,pins = <
+							MX6DL_PAD_SD1_CMD__SD1_CMD    0x17059
+							MX6DL_PAD_SD1_CLK__SD1_CLK    0x10059
+							MX6DL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+							MX6DL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+							MX6DL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+							MX6DL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+						>;
+					};
+				};
+
+
 				usdhc2 {
 					pinctrl_usdhc2_1: usdhc2grp-1 {
 						fsl,pins = <
-- 
1.8.1.2