[PATCH v3 4/4] USB: OMAP1: Tahvo USB transceiver driver
Felipe Balbi
balbi at ti.com
Mon Jul 8 03:21:09 EDT 2013
Hi,
On Tue, Jun 18, 2013 at 08:07:01PM +0300, Aaro Koskinen wrote:
> +static ssize_t vbus_state_show(struct device *device,
> + struct device_attribute *attr, char *buf)
> +{
> + struct tahvo_usb *tu = dev_get_drvdata(device);
> + return sprintf(buf, "%d\n", tu->vbus_state);
> +}
> +static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
VBUS status sounds generic enough, also, you should be printing on/off
here instead of tahvo-specific values. Some users might not have access
to the docs, or even the kernel sources, to understand what that integer
means.
> +static void tahvo_usb_become_host(struct tahvo_usb *tu)
> +{
> + struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
> +
> + extcon_set_cable_state(&tu->extcon, "USB-HOST", true);
> +
> + /* Power up the transceiver in USB host mode */
> + retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
> + USBR_MASTER_SW2 | USBR_MASTER_SW1);
> + tu->phy.state = OTG_STATE_A_IDLE;
> +
> + check_vbus_state(tu);
> +}
> +
> +static void tahvo_usb_stop_host(struct tahvo_usb *tu)
> +{
> + tu->phy.state = OTG_STATE_A_IDLE;
shouldn't you undo tahvo_usb_become_host() here ? I mean, set the
transceiver to SLAVE ?
> +static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
> +{
> + struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
> +
> + dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
> +
> + if (otg == NULL)
> + return -ENODEV;
> +
> + mutex_lock(&tu->serialize);
> +
> + if (host == NULL) {
> + if (tu->tahvo_mode == TAHVO_MODE_HOST)
> + tahvo_usb_power_off(tu);
> + otg->host = NULL;
> + mutex_unlock(&tu->serialize);
> + return 0;
> + }
> +
> + if (tu->tahvo_mode == TAHVO_MODE_HOST) {
> + otg->host = NULL;
> + tahvo_usb_become_host(tu);
> + }
> +
> + otg->host = host;
> +
> + mutex_unlock(&tu->serialize);
> +
> + return 0;
> +}
> +
> +static int tahvo_usb_set_peripheral(struct usb_otg *otg,
> + struct usb_gadget *gadget)
I want to get rid of the extra 'gadget' and 'host' parameters on
->set_host() and ->set_peripheral(). Nobody really uses them other than:
my_phy->phy.otg->{gadget,host} = {gadget,host};
For that, I need all other PHYs to stop relying on those parameters and
I'll cook patches for that for v3.12 merge window.
> +static ssize_t otg_mode_store(struct device *device,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct tahvo_usb *tu = dev_get_drvdata(device);
> + int r;
> +
> + mutex_lock(&tu->serialize);
> + if (count >= 4 && strncmp(buf, "host", 4) == 0) {
> + if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
> + tahvo_usb_stop_peripheral(tu);
> + tu->tahvo_mode = TAHVO_MODE_HOST;
> + if (tu->phy.otg->host) {
> + dev_info(device, "HOST mode: host controller present\n");
> + tahvo_usb_become_host(tu);
> + } else {
> + dev_info(device, "HOST mode: no host controller, powering off\n");
> + tahvo_usb_power_off(tu);
> + }
> + r = strlen(buf);
> + } else if (count >= 10 && strncmp(buf, "peripheral", 10) == 0) {
> + if (tu->tahvo_mode == TAHVO_MODE_HOST)
> + tahvo_usb_stop_host(tu);
> + tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
> + if (tu->phy.otg->gadget) {
> + dev_info(device, "PERIPHERAL mode: gadget driver present\n");
> + tahvo_usb_become_peripheral(tu);
> + } else {
> + dev_info(device, "PERIPHERAL mode: no gadget driver, powering off\n");
> + tahvo_usb_power_off(tu);
> + }
> + r = strlen(buf);
> + } else {
> + r = -EINVAL;
> + }
> + mutex_unlock(&tu->serialize);
> +
> + return r;
> +}
> +
> +static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
this looks like something which would be very nice if implemented
generically. Since you, anyway miss the documentation in
Documentation/ABI/ and need to respin the patch, how about making this
generic ?
> +static int tahvo_usb_probe(struct platform_device *pdev)
> +{
> + struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
> + struct tahvo_usb *tu;
> + int ret;
> +
> + tu = devm_kzalloc(&pdev->dev, sizeof(*tu), GFP_KERNEL);
> + if (!tu)
> + return -ENOMEM;
> +
> + tu->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*tu->phy.otg),
> + GFP_KERNEL);
> + if (!tu->phy.otg)
> + return -ENOMEM;
> +
> + tu->pt_dev = pdev;
> +
> + /* Default mode */
> +#ifdef CONFIG_TAHVO_USB_HOST_BY_DEFAULT
> + tu->tahvo_mode = TAHVO_MODE_HOST;
> +#else
> + tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
> +#endif
should you call become_host()/become_peripheral() here ?
> + mutex_init(&tu->serialize);
> +
> + tu->ick = devm_clk_get(&pdev->dev, "usb_l4_ick");
> + if (!IS_ERR(tu->ick))
> + clk_enable(tu->ick);
> +
> + /*
> + * Set initial state, so that we generate kevents only on state changes.
> + */
> + tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS;
> +
> + tu->extcon.name = DRIVER_NAME;
> + tu->extcon.supported_cable = tahvo_cable;
> + ret = extcon_dev_register(&tu->extcon, &pdev->dev);
> + if (ret) {
> + dev_err(&pdev->dev, "could not register extcon device: %d\n",
> + ret);
> + return ret;
> + }
> +
> + /* Set the initial cable state. */
> + extcon_set_cable_state(&tu->extcon, "USB-HOST",
> + tu->tahvo_mode == TAHVO_MODE_HOST);
> + extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
> +
> + tu->irq = platform_get_irq(pdev, 0);
> + ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt, 0,
> + "tahvo-vbus", tu);
since your hardirq handler is NULL, you *must* pass IRQF_ONESHOT. /Could
also use devm_request_threaded_irq()
> + if (ret) {
> + dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n",
> + ret);
> + goto err_disable_clk;
> + }
> +
> + /* Attributes */
> + ret = device_create_file(&pdev->dev, &dev_attr_vbus_state);
> + ret |= device_create_file(&pdev->dev, &dev_attr_otg_mode);
heh, Greg wrote a very interesting article recently (look at his blog)
discussing kernel/userland races wrt creation of sysfs files.
> + /* Create OTG interface */
> + tahvo_usb_power_off(tu);
> + tu->phy.dev = &pdev->dev;
> + tu->phy.state = OTG_STATE_UNDEFINED;
> + tu->phy.label = DRIVER_NAME;
> + tu->phy.set_suspend = tahvo_usb_set_suspend;
> +
> + tu->phy.otg->phy = &tu->phy;
> + tu->phy.otg->set_host = tahvo_usb_set_host;
> + tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;
> +
> + ret = usb_add_phy(&tu->phy, USB_PHY_TYPE_USB2);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "cannot register USB transceiver: %d\n",
> + ret);
> + goto err_free_irq;
> + }
> +
> + dev_set_drvdata(&pdev->dev, tu);
what if someone accesses the sysfs file you've already created before
you call dev_set_drvdata? (not sure if it's possible).
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130708/fbd977f2/attachment.sig>
More information about the linux-arm-kernel
mailing list