[PATCH] ARM: pxa: propagate errors from regulator_enable() to pxamci

[Sachin Kamat]

On 5 July 2013 21:21, Arnd Bergmann <arnd at arndb.de> wrote:
> The em_x270_mci_setpower() and em_x270_usb_hub_init() functions
> call regulator_enable(), which may return an error that must
> be checked.
>
> This changes the em_x270_usb_hub_init() function to bail out
> if it fails, and changes the pxamci_platform_data->setpower
> callback so that the a failed em_x270_mci_setpower call
> can be propagated by the pxamci driver into the mmc core.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Cc: Mike Rapoport <mike at compulab.co.il>
> Cc: Paul Gortmaker <paul.gortmaker at windriver.com>
> Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
> Cc: Haojian Zhuang <haojian.zhuang at gmail.com>
> Cc: Chris Ball <cjb at laptop.org>
>
> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
> index f6726bb..f8062e4 100644
> --- a/arch/arm/mach-pxa/em-x270.c
> +++ b/arch/arm/mach-pxa/em-x270.c
> @@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
>         /* USB Hub power-on and reset */
>         gpio_direction_output(usb_hub_reset, 1);
>         gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
> -       regulator_enable(em_x270_usb_ldo);
> +       err = regulator_enable(em_x270_usb_ldo);
> +       if (err)
> +               goto err_free_rst_gpio;
> +
>         gpio_set_value(usb_hub_reset, 0);
>         gpio_set_value(usb_hub_reset, 1);
>         regulator_disable(em_x270_usb_ldo);
> -       regulator_enable(em_x270_usb_ldo);
> +       if (err)
> +               goto err_free_rst_gpio;

Shouldn't this check be after the below (regulator_enable) statement?

> +
> +       err = regulator_enable(em_x270_usb_ldo);
>         gpio_set_value(usb_hub_reset, 0);
>         gpio_set_value(GPIO9_USB_VBUS_EN, 1);
>
>         return 0;
>
> +err_free_rst_gpio:
> +       gpio_free(usb_hub_reset);
>  err_free_vbus_gpio:
>         gpio_free(GPIO9_USB_VBUS_EN);
>  err_free_usb_ldo:
> @@ -592,7 +600,7 @@ err_irq:
>         return err;
>  }

-- 
With warm regards,
Sachin