[RFC] ARM: dts: imx27: Add core voltages
Alexander Shiyan
shc_work at mail.ru
Sun Jul 7 10:51:02 EDT 2013
This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes
is documented in the datasheet, we add a 266 MHz frequency for conform this.
For 133 MHz CPU frequency minimal voltage is used (1.2V).
Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
arch/arm/boot/dts/imx27.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index a587294..c9bacca 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -57,13 +57,15 @@
device_type = "cpu";
compatible = "arm,arm926ej-s";
operating-points = <
- /* kHz uV (No regulator support) */
- 133000 0
- 399000 0
+ /* kHz uV */
+ 133000 1200000
+ 266000 1300000
+ 399000 1450000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks 18>;
clock-names = "cpu";
+ voltage-tolerance = <1>;
};
};
--
1.8.1.5
More information about the linux-arm-kernel
mailing list