[PATCH v3 4/6] ARM: dts: imx6q{dl}: fix the wrong RTS/CTS pad name

[Lothar Waßmann]

Hi,

Shawn Guo writes:
> On Fri, Jul 05, 2013 at 02:12:30PM +0800, Huang Shijie wrote:
> > There is something wrong with the RTS/CTS pads:
> >   The RTS pad is assigned with the CTS's value;
> >   while the CTS pad is assigned with the RTS's value.
> > 
> 
> So basically, you are saying that select_input should be set up for CTS
> rather than RTS.  It seems that the people who generated the macro got
> the wrong input from developer.
> 
programming 'select_input' only makes sense for inputs, not outputs.
Since CTS is an output signal, select_input only makes sense for the
RTS function of the pads.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________