[PATCH] Route kbd LEDs through the generic LEDs layer
Samuel Thibault
samuel.thibault at ens-lyon.org
Sun Jul 7 06:10:28 EDT 2013
This permits to reassign keyboard LEDs to something else than keyboard "leds"
state, by adding keyboard led and modifier triggers connected to a series
of VT input LEDs, themselves connected to VT input triggers, which
per-input device LEDs use by default. Userland can thus easily change the LED
behavior of (a priori) all input devices, or of particular input devices.
This also permits to fix #7063 from userland by using a modifier to implement
proper CapsLock behavior and have the keyboard caps lock led show that modifier
state.
Signed-off-by: Samuel Thibault <samuel.thibault at ens-lyon.org>
[ebroder at mokafive.com: Rebased to 3.2-rc1 or so, cleaned up some includes, and fixed some constants]
Signed-off-by: Evan Broder <evan at ebroder.net>
diff --exclude .svn -ur linux-3.10-orig/Documentation/leds/leds-class.txt linux-3.10-perso/Documentation/leds/leds-class.txt
--- linux-3.10-orig/Documentation/leds/leds-class.txt 2013-04-29 13:27:16.959258613 +0200
+++ linux-3.10-perso/Documentation/leds/leds-class.txt 2013-07-01 23:51:39.229318781 +0200
@@ -2,9 +2,6 @@
LED handling under Linux
========================
-If you're reading this and thinking about keyboard leds, these are
-handled by the input subsystem and the led class is *not* needed.
-
In its simplest form, the LED class just allows control of LEDs from
userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
LED is defined in max_brightness file. The brightness file will set the brightness
diff --exclude .svn -ur linux-3.10-orig/drivers/input/input.c linux-3.10-perso/drivers/input/input.c
--- linux-3.10-orig/drivers/input/input.c 2013-04-29 13:27:16.959258613 +0200
+++ linux-3.10-perso/drivers/input/input.c 2013-07-01 23:51:39.233318421 +0200
@@ -28,6 +28,7 @@
#include <linux/mutex.h>
#include <linux/rcupdate.h>
#include "input-compat.h"
+#include "leds.h"
MODULE_AUTHOR("Vojtech Pavlik <vojtech at suse.cz>");
MODULE_DESCRIPTION("Input core");
@@ -708,6 +709,11 @@
handle->open = 0;
spin_unlock_irq(&dev->event_lock);
+
+#ifdef CONFIG_INPUT_LEDS
+ if (is_event_supported(EV_LED, dev->evbit, EV_MAX))
+ input_led_disconnect(dev);
+#endif
}
/**
@@ -2092,6 +2098,11 @@
list_add_tail(&dev->node, &input_dev_list);
+#ifdef CONFIG_INPUT_LEDS
+ if (is_event_supported(EV_LED, dev->evbit, EV_MAX))
+ input_led_connect(dev);
+#endif
+
list_for_each_entry(handler, &input_handler_list, node)
input_attach_handler(dev, handler);
diff --exclude .svn -ur linux-3.10-orig/drivers/input/Kconfig linux-3.10-perso/drivers/input/Kconfig
--- linux-3.10-orig/drivers/input/Kconfig 2013-04-29 13:32:29.997497163 +0200
+++ linux-3.10-perso/drivers/input/Kconfig 2013-07-01 23:51:39.233318421 +0200
@@ -178,6 +178,15 @@
source "drivers/input/keyboard/Kconfig"
+config INPUT_LEDS
+ tristate "LED Support"
+ depends on LEDS_CLASS
+ select LEDS_TRIGGERS
+ default y
+ help
+ This option enables support for the LEDs on keyboard managed
+ by the input layer.
+
source "drivers/input/mouse/Kconfig"
source "drivers/input/joystick/Kconfig"
diff --exclude .svn -ur linux-3.10-orig/drivers/input/Makefile linux-3.10-perso/drivers/input/Makefile
--- linux-3.10-orig/drivers/input/Makefile 2013-04-29 13:27:16.959258613 +0200
+++ linux-3.10-perso/drivers/input/Makefile 2013-07-01 23:51:39.233318421 +0200
@@ -18,6 +18,7 @@
obj-$(CONFIG_INPUT_EVBUG) += evbug.o
obj-$(CONFIG_INPUT_KEYBOARD) += keyboard/
+obj-$(CONFIG_INPUT_LEDS) += leds.o
obj-$(CONFIG_INPUT_MOUSE) += mouse/
obj-$(CONFIG_INPUT_JOYSTICK) += joystick/
obj-$(CONFIG_INPUT_TABLET) += tablet/
diff --exclude .svn -ur linux-3.10-orig/drivers/leds/Kconfig linux-3.10-perso/drivers/leds/Kconfig
--- linux-3.10-orig/drivers/leds/Kconfig 2013-07-01 01:56:00.335874214 +0200
+++ linux-3.10-perso/drivers/leds/Kconfig 2013-07-01 23:51:39.233318421 +0200
@@ -11,9 +11,6 @@
Say Y to enable Linux LED support. This allows control of supported
LEDs from both userspace and optionally, by kernel events (triggers).
- This is not related to standard keyboard LEDs which are controlled
- via the input system.
-
if NEW_LEDS
config LEDS_CLASS
diff --exclude .svn -ur linux-3.10-orig/drivers/tty/Kconfig linux-3.10-perso/drivers/tty/Kconfig
--- linux-3.10-orig/drivers/tty/Kconfig 2013-04-29 13:32:36.353298705 +0200
+++ linux-3.10-perso/drivers/tty/Kconfig 2013-07-01 23:51:39.237318056 +0200
@@ -13,6 +13,10 @@
bool "Virtual terminal" if EXPERT
depends on !S390 && !UML
select INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGERS
+ select INPUT_LEDS
default y
---help---
If you say Y here, you will get support for terminal devices with
diff --exclude .svn -ur linux-3.10-orig/drivers/tty/vt/keyboard.c linux-3.10-perso/drivers/tty/vt/keyboard.c
--- linux-3.10-orig/drivers/tty/vt/keyboard.c 2013-04-29 13:32:36.681288463 +0200
+++ linux-3.10-perso/drivers/tty/vt/keyboard.c 2013-07-01 23:51:39.237318056 +0200
@@ -33,6 +33,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/leds.h>
#include <linux/kbd_kern.h>
#include <linux/kbd_diacr.h>
@@ -130,6 +131,7 @@
static int shift_state = 0;
static unsigned char ledstate = 0xff; /* undefined */
+static unsigned char lockstate = 0xff; /* undefined */
static unsigned char ledioctl;
static struct ledptr {
@@ -967,6 +969,32 @@
}
}
+/* We route VT keyboard "leds" through triggers */
+static void kbd_ledstate_trigger_activate(struct led_classdev *cdev);
+static struct led_trigger ledtrig_ledstate[] = {
+#define DEFINE_LEDSTATE_TRIGGER(kbd_led, nam) \
+ [kbd_led] = { .name = nam, .activate = kbd_ledstate_trigger_activate, }
+ DEFINE_LEDSTATE_TRIGGER(VC_SCROLLOCK, "scrollock"),
+ DEFINE_LEDSTATE_TRIGGER(VC_NUMLOCK, "numlock"),
+ DEFINE_LEDSTATE_TRIGGER(VC_CAPSLOCK, "capslock"),
+ DEFINE_LEDSTATE_TRIGGER(VC_KANALOCK, "kanalock"),
+#undef DEFINE_LEDSTATE_TRIGGER
+};
+static void kbd_lockstate_trigger_activate(struct led_classdev *cdev);
+static struct led_trigger ledtrig_lockstate[] = {
+#define DEFINE_LOCKSTATE_TRIGGER(kbd_led, nam) \
+ [kbd_led] = { .name = nam, .activate = kbd_lockstate_trigger_activate, }
+ DEFINE_LOCKSTATE_TRIGGER(VC_SHIFTLOCK, "shiftlock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_ALTGRLOCK, "altgrlock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_CTRLLOCK, "ctrllock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_ALTLOCK, "altlock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_SHIFTLLOCK, "shiftllock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_SHIFTRLOCK, "shiftrlock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_CTRLLLOCK, "ctrlllock"),
+ DEFINE_LOCKSTATE_TRIGGER(VC_CTRLRLOCK, "ctrlrlock"),
+#undef DEFINE_LOCKSTATE_TRIGGER
+};
+
/*
* The leds display either (i) the status of NumLock, CapsLock, ScrollLock,
* or (ii) whatever pattern of lights people want to show using KDSETLED,
@@ -1002,6 +1030,7 @@
leds = kbd->ledflagstate;
+ /* TODO: should be replaced by a LED trigger */
if (kbd->ledmode == LED_SHOW_MEM) {
for (i = 0; i < 3; i++)
if (ledptrs[i].valid) {
@@ -1014,18 +1043,24 @@
return leds;
}
-static int kbd_update_leds_helper(struct input_handle *handle, void *data)
+/* Called on trigger connection, to set initial state */
+static void kbd_ledstate_trigger_activate(struct led_classdev *cdev)
{
- unsigned char leds = *(unsigned char *)data;
+ struct led_trigger *trigger = cdev->trigger;
+ int led = trigger - ledtrig_ledstate;
- if (test_bit(EV_LED, handle->dev->evbit)) {
- input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
- input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02));
- input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04));
- input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
- }
+ tasklet_disable(&keyboard_tasklet);
+ led_trigger_event(trigger, ledstate & (1 << led) ? LED_FULL : LED_OFF);
+ tasklet_enable(&keyboard_tasklet);
+}
+static void kbd_lockstate_trigger_activate(struct led_classdev *cdev)
+{
+ struct led_trigger *trigger = cdev->trigger;
+ int led = trigger - ledtrig_lockstate;
- return 0;
+ tasklet_disable(&keyboard_tasklet);
+ led_trigger_event(trigger, lockstate & (1 << led) ? LED_FULL : LED_OFF);
+ tasklet_enable(&keyboard_tasklet);
}
/**
@@ -1120,10 +1155,24 @@
spin_unlock_irqrestore(&led_lock, flags);
if (leds != ledstate) {
- input_handler_for_each_handle(&kbd_handler, &leds,
- kbd_update_leds_helper);
+ int i;
+ for (i = 0; i < ARRAY_SIZE(ledtrig_ledstate); i++)
+ if ((leds ^ ledstate) & (1 << i))
+ led_trigger_event(&ledtrig_ledstate[i],
+ leds & (1 << i)
+ ? LED_FULL : LED_OFF);
ledstate = leds;
}
+
+ if (kbd->lockstate != lockstate) {
+ int i;
+ for (i = 0; i < ARRAY_SIZE(ledtrig_lockstate); i++)
+ if ((kbd->lockstate ^ lockstate) & (1 << i))
+ led_trigger_event(&ledtrig_lockstate[i],
+ kbd->lockstate & (1 << i)
+ ? LED_FULL : LED_OFF);
+ lockstate = kbd->lockstate;
+ }
}
DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
@@ -1461,20 +1510,6 @@
kfree(handle);
}
-/*
- * Start keyboard handler on the new keyboard by refreshing LED state to
- * match the rest of the system.
- */
-static void kbd_start(struct input_handle *handle)
-{
- tasklet_disable(&keyboard_tasklet);
-
- if (ledstate != 0xff)
- kbd_update_leds_helper(handle, &ledstate);
-
- tasklet_enable(&keyboard_tasklet);
-}
-
static const struct input_device_id kbd_ids[] = {
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
@@ -1496,7 +1531,6 @@
.match = kbd_match,
.connect = kbd_connect,
.disconnect = kbd_disconnect,
- .start = kbd_start,
.name = "kbd",
.id_table = kbd_ids,
};
@@ -1520,6 +1554,11 @@
if (error)
return error;
+ for (i = 0; i < ARRAY_SIZE(ledtrig_ledstate); i++)
+ led_trigger_register(&ledtrig_ledstate[i]);
+ for (i = 0; i < ARRAY_SIZE(ledtrig_lockstate); i++)
+ led_trigger_register(&ledtrig_lockstate[i]);
+
tasklet_enable(&keyboard_tasklet);
tasklet_schedule(&keyboard_tasklet);
diff --exclude .svn -ur linux-3.10-orig/include/linux/input.h linux-3.10-perso/include/linux/input.h
--- linux-3.10-orig/include/linux/input.h 2013-04-29 13:27:16.959258613 +0200
+++ linux-3.10-perso/include/linux/input.h 2013-07-01 23:51:39.241317685 +0200
@@ -164,6 +164,8 @@
unsigned long snd[BITS_TO_LONGS(SND_CNT)];
unsigned long sw[BITS_TO_LONGS(SW_CNT)];
+ struct led_classdev *leds;
+
int (*open)(struct input_dev *dev);
void (*close)(struct input_dev *dev);
int (*flush)(struct input_dev *dev, struct file *file);
--- linux-3.10-orig/drivers/input/leds.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-3.10-perso/drivers/input/leds.h 2011-11-14 02:24:26.738456456 +0100
@@ -0,0 +1,14 @@
+/*
+ * LED support for the input layer
+ *
+ * Copyright 2010-2013 Samuel Thibault <samuel.thibault at ens-lyon.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+
+extern int input_led_connect(struct input_dev *dev);
+extern void input_led_disconnect(struct input_dev *dev);
--- linux-3.10-orig/drivers/input/leds.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-3.10-perso/drivers/input/leds.c 2011-11-14 03:23:07.578469395 +0100
@@ -0,0 +1,243 @@
+/*
+ * LED support for the input layer
+ *
+ * Copyright 2010-2013 Samuel Thibault <samuel.thibault at ens-lyon.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+
+/*
+ * Keyboard LEDs are propagated by default like the following example:
+ *
+ * VT keyboard numlock trigger
+ * -> vt::numl VT LED
+ * -> vt-numl VT trigger
+ * -> per-device inputx::numl LED
+ *
+ * Userland can however choose the trigger for the vt::numl LED, or
+ * independently choose the trigger for any inputx::numl LED.
+ */
+
+/* VT LED classes and triggers are registered on-demand according to
+ * existing LED devices */
+
+/* Handler for VT LEDs, just triggers the corresponding VT trigger. */
+static void vt_led_set(struct led_classdev *cdev,
+ enum led_brightness brightness);
+static struct led_classdev vt_leds[LED_CNT] = {
+#define DEFINE_INPUT_LED(vt_led, nam, deftrig) \
+ [vt_led] = { \
+ .name = "vt::"nam, \
+ .max_brightness = 1, \
+ .brightness_set = vt_led_set, \
+ .default_trigger = deftrig, \
+ }
+/* Default triggers for the VT LEDs just correspond to the legacy
+ * usage. */
+ DEFINE_INPUT_LED(LED_NUML, "numl", "numlock"),
+ DEFINE_INPUT_LED(LED_CAPSL, "capsl", "capslock"),
+ DEFINE_INPUT_LED(LED_SCROLLL, "scrolll", "scrollock"),
+ DEFINE_INPUT_LED(LED_COMPOSE, "compose", NULL),
+ DEFINE_INPUT_LED(LED_KANA, "kana", "kanalock"),
+ DEFINE_INPUT_LED(LED_SLEEP, "sleep", NULL),
+ DEFINE_INPUT_LED(LED_SUSPEND, "suspend", NULL),
+ DEFINE_INPUT_LED(LED_MUTE, "mute", NULL),
+ DEFINE_INPUT_LED(LED_MISC, "misc", NULL),
+ DEFINE_INPUT_LED(LED_MAIL, "mail", NULL),
+ DEFINE_INPUT_LED(LED_CHARGING, "charging", NULL),
+};
+static const char *const vt_led_names[LED_CNT] = {
+ [LED_NUML] = "numl",
+ [LED_CAPSL] = "capsl",
+ [LED_SCROLLL] = "scrolll",
+ [LED_COMPOSE] = "compose",
+ [LED_KANA] = "kana",
+ [LED_SLEEP] = "sleep",
+ [LED_SUSPEND] = "suspend",
+ [LED_MUTE] = "mute",
+ [LED_MISC] = "misc",
+ [LED_MAIL] = "mail",
+ [LED_CHARGING] = "charging",
+};
+/* Handler for hotplug initialization */
+static void vt_led_trigger_activate(struct led_classdev *cdev);
+/* VT triggers */
+static struct led_trigger vt_led_triggers[LED_CNT] = {
+#define DEFINE_INPUT_LED_TRIGGER(vt_led, nam) \
+ [vt_led] = { \
+ .name = "vt-"nam, \
+ .activate = vt_led_trigger_activate, \
+ }
+ DEFINE_INPUT_LED_TRIGGER(LED_NUML, "numl"),
+ DEFINE_INPUT_LED_TRIGGER(LED_CAPSL, "capsl"),
+ DEFINE_INPUT_LED_TRIGGER(LED_SCROLLL, "scrolll"),
+ DEFINE_INPUT_LED_TRIGGER(LED_COMPOSE, "compose"),
+ DEFINE_INPUT_LED_TRIGGER(LED_KANA, "kana"),
+ DEFINE_INPUT_LED_TRIGGER(LED_SLEEP, "sleep"),
+ DEFINE_INPUT_LED_TRIGGER(LED_SUSPEND, "suspend"),
+ DEFINE_INPUT_LED_TRIGGER(LED_MUTE, "mute"),
+ DEFINE_INPUT_LED_TRIGGER(LED_MISC, "misc"),
+ DEFINE_INPUT_LED_TRIGGER(LED_MAIL, "mail"),
+ DEFINE_INPUT_LED_TRIGGER(LED_CHARGING, "charging"),
+};
+/* Lock for registration coherency */
+static DEFINE_MUTEX(vt_led_registered_lock);
+/* Which VT LED classes and triggers are registered */
+static unsigned long vt_led_registered[BITS_TO_LONGS(LED_CNT)];
+/* Number of input devices having each LED */
+static int vt_led_references[LED_CNT];
+
+/* VT LED state change, tell the VT trigger. */
+static void vt_led_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ int led = cdev - vt_leds;
+
+ led_trigger_event(&vt_led_triggers[led], !!brightness);
+}
+
+/* LED state change for some keyboard, notify that keyboard. */
+static void perdevice_input_led_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct input_dev *dev;
+ struct led_classdev *leds;
+ int led;
+
+ dev = cdev->dev->platform_data;
+ if (!dev)
+ /* Still initializing */
+ return;
+ leds = dev->leds;
+ led = cdev - leds;
+
+ input_event(dev, EV_LED, led, !!brightness);
+ input_event(dev, EV_SYN, SYN_REPORT, 0);
+}
+
+/* Keyboard hotplug, initialize its LED status */
+static void vt_led_trigger_activate(struct led_classdev *cdev)
+{
+ struct led_trigger *trigger = cdev->trigger;
+ int led = trigger - vt_led_triggers;
+
+ if (cdev->brightness_set)
+ cdev->brightness_set(cdev, vt_leds[led].brightness);
+}
+
+/* Free led stuff from input device, used at abortion and disconnection. */
+static void input_led_delete(struct input_dev *dev)
+{
+ if (dev) {
+ struct led_classdev *leds = dev->leds;
+ if (leds) {
+ int i;
+ for (i = 0; i < LED_CNT; i++)
+ kfree(leds[i].name);
+ kfree(leds);
+ dev->leds = NULL;
+ }
+ }
+}
+
+/* A new input device with potential LEDs to connect. */
+int input_led_connect(struct input_dev *dev)
+{
+ int i, error = 0;
+ struct led_classdev *leds;
+
+ dev->leds = leds = kzalloc(sizeof(*leds) * LED_CNT, GFP_KERNEL);
+ if (!dev->leds)
+ return -ENOMEM;
+
+ /* lazily register missing VT LEDs */
+ mutex_lock(&vt_led_registered_lock);
+ for (i = 0; i < LED_CNT; i++)
+ if (vt_leds[i].name && test_bit(i, dev->ledbit)) {
+ if (!vt_led_references[i]) {
+ led_trigger_register(&vt_led_triggers[i]);
+ /* This keyboard is first to have led i,
+ * try to register it */
+ if (!led_classdev_register(NULL, &vt_leds[i]))
+ vt_led_references[i] = 1;
+ else
+ led_trigger_unregister(&vt_led_triggers[i]);
+ } else
+ vt_led_references[i]++;
+ }
+ mutex_unlock(&vt_led_registered_lock);
+
+ /* and register this device's LEDs */
+ for (i = 0; i < LED_CNT; i++)
+ if (vt_leds[i].name && test_bit(i, dev->ledbit)) {
+ leds[i].name = kasprintf(GFP_KERNEL, "%s::%s",
+ dev_name(&dev->dev),
+ vt_led_names[i]);
+ if (!leds[i].name) {
+ error = -ENOMEM;
+ goto err;
+ }
+ leds[i].max_brightness = 1;
+ leds[i].brightness_set = perdevice_input_led_set;
+ leds[i].default_trigger = vt_led_triggers[i].name;
+ }
+
+ /* No issue so far, we can register for real. */
+ for (i = 0; i < LED_CNT; i++)
+ if (leds[i].name) {
+ led_classdev_register(&dev->dev, &leds[i]);
+ leds[i].dev->platform_data = dev;
+ perdevice_input_led_set(&leds[i],
+ vt_leds[i].brightness);
+ }
+
+ return 0;
+
+err:
+ input_led_delete(dev);
+ return error;
+}
+
+/* Disconnected input device. Clean it, and deregister now-useless VT LEDs
+ * and triggers. */
+extern void input_led_disconnect(struct input_dev *dev)
+{
+ int i;
+ struct led_classdev *leds = dev->leds;
+
+ for (i = 0; i < LED_CNT; i++)
+ if (leds[i].name)
+ led_classdev_unregister(&leds[i]);
+
+ input_led_delete(dev);
+
+ mutex_lock(&vt_led_registered_lock);
+ for (i = 0; i < LED_CNT; i++) {
+ if (!vt_leds[i].name || !test_bit(i, dev->ledbit))
+ continue;
+
+ vt_led_references[i]--;
+ if (vt_led_references[i]) {
+ /* Still some devices needing it */
+ continue;
+ }
+
+ led_classdev_unregister(&vt_leds[i]);
+ led_trigger_unregister(&vt_led_triggers[i]);
+ clear_bit(i, vt_led_registered);
+ }
+ mutex_unlock(&vt_led_registered_lock);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("User LED support for input layer");
+MODULE_AUTHOR("Samuel Thibault <samuel.thibault at ens-lyon.org>");
More information about the linux-arm-kernel
mailing list