[PATCH v3 12/13] ARM: dts: Add S5K5BA sensor regulator definitions for Trats board

[Tomasz Figa]

Hi Sylwester, Andrzej,

On Monday 01 of July 2013 17:22:34 Sylwester Nawrocki wrote:
> From: Andrzej Hajda <a.hajda at samsung.com>
> 
> Add MAX8998 LDO12 and fixed voltage regulator nodes. While at it,
> all fixed voltage regulator nodes are grouped in a 'regulators' node.
> 
> Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  arch/arm/boot/dts/exynos4210-trats.dts |   80
> +++++++++++++++++++++++++------- 1 file changed, 64 insertions(+), 16
> deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4210-trats.dts
> b/arch/arm/boot/dts/exynos4210-trats.dts index 6b1568e..f62e299 100644
> --- a/arch/arm/boot/dts/exynos4210-trats.dts
> +++ b/arch/arm/boot/dts/exynos4210-trats.dts
> @@ -30,13 +30,64 @@
>  		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 
rootwait
> earlyprintk panic=5"; };
> 
> -	vemmc_reg: voltage-regulator at 0 {
> -	        compatible = "regulator-fixed";
> -		regulator-name = "VMEM_VDD_2.8V";
> -		regulator-min-microvolt = <2800000>;
> -		regulator-max-microvolt = <2800000>;
> -		gpio = <&gpk0 2 0>;
> -		enable-active-high;
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;

I don't think any addressing is needed for these regulators, so I'd 
suggest removing those #properties and replacing @N with -N suffix.

Otherwise looks good.

Best regards,
Tomasz

> +
> +		vemmc_reg: regulator at 0 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VMEM_VDD_2.8V";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			gpio = <&gpk0 2 0>;
> +			enable-active-high;
> +		};
> +
> +		tsp_reg: regulator at 1 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "TSP_FIXED_VOLTAGES";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			gpio = <&gpl0 3 0>;
> +			enable-active-high;
> +		};
> +
> +		cam_af_28v_reg: regulator at 2 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "8M_AF_2.8V_EN";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			gpio = <&gpk1 1 0>;
> +			enable-active-high;
> +		};
> +
> +		cam_io_en_reg: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "CAM_IO_EN";
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			gpio = <&gpe2 1 0>;
> +			enable-active-high;
> +		};
> +
> +		cam_io_12v_reg: regulator at 4 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "8M_1.2V_EN";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			gpio = <&gpe2 5 0>;
> +			enable-active-high;
> +		};
> +
> +		vt_core_15v_reg: regulator at 5 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VT_CORE_1.5V";
> +			regulator-min-microvolt = <1500000>;
> +			regulator-max-microvolt = <1500000>;
> +			gpio = <&gpe2 2 0>;
> +			enable-active-high;
> +		};
>  	};
> 
>  	sdhci_emmc: sdhci at 12510000 {
> @@ -97,15 +148,6 @@
>  		};
>  	};
> 
> -	tsp_reg: voltage-regulator {
> -		compatible = "regulator-fixed";
> -		regulator-name = "TSP_FIXED_VOLTAGES";
> -		regulator-min-microvolt = <2800000>;
> -		regulator-max-microvolt = <2800000>;
> -		gpio = <&gpl0 3 0>;
> -		enable-active-high;
> -	};
> -
>  	i2c at 13890000 {
>  		samsung,i2c-sda-delay = <100>;
>  		samsung,i2c-slave-addr = <0x10>;
> @@ -218,6 +260,12 @@
>  				     regulator-always-on;
>  				};
> 
> +				vtcam_reg: LDO12 {
> +				     regulator-name = "VT_CAM_1.8V";
> +				     regulator-min-microvolt = <1800000>;
> +				     regulator-max-microvolt = <1800000>;
> +				};
> +
>  				vcclcd_reg: LDO13 {
>  				     regulator-name = "VCC_3.3V_LCD";
>  				     regulator-min-microvolt = <3300000>;