[PATCH 6/9] clocksource: dw_apb_timer: quirk for inverted int mask
Heiko Stübner
heiko at sntech.de
Fri Jul 5 18:58:34 EDT 2013
this patch should have had a
From: Ulrich Prinz <ulrich.prinz at googlemail.com>
sorry for the mistake
Am Samstag, 6. Juli 2013, 00:54:35 schrieb Heiko Stübner:
> Some timer variants use an inverted setting to mask the timer interrupt.
> Therefore add a quirk to handle these variants.
>
> Signed-off-by: Ulrich Prinz <ulrich.prinz at googlemail.com>
> ---
> drivers/clocksource/dw_apb_timer.c | 23 ++++++++++++++++++-----
> include/linux/dw_apb_timer.h | 6 ++++++
> 2 files changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/clocksource/dw_apb_timer.c
> b/drivers/clocksource/dw_apb_timer.c index 23cd7c6..7705d13 100644
> --- a/drivers/clocksource/dw_apb_timer.c
> +++ b/drivers/clocksource/dw_apb_timer.c
> @@ -84,7 +84,10 @@ static void apbt_disable_int(struct dw_apb_timer *timer)
> {
> unsigned long ctrl = apbt_readl(timer, timer->reg_control);
>
> - ctrl |= APBTMR_CONTROL_INT;
> + if (timer->quirks & APBTMR_QUIRK_INVERSE_INTMASK)
> + ctrl &= ~APBTMR_CONTROL_INT;
> + else
> + ctrl |= APBTMR_CONTROL_INT;
> apbt_writel(timer, ctrl, timer->reg_control);
> }
>
> @@ -134,7 +137,10 @@ static void apbt_enable_int(struct
> dw_apb_clock_event_device *dw_ced) /* clear pending intr */
> if (dw_ced->eoi)
> dw_ced->eoi(timer);
> - ctrl &= ~APBTMR_CONTROL_INT;
> + if (timer->quirks & APBTMR_QUIRK_INVERSE_INTMASK)
> + ctrl |= APBTMR_CONTROL_INT;
> + else
> + ctrl &= ~APBTMR_CONTROL_INT;
> apbt_writel(timer, ctrl, timer->reg_control);
> }
>
> @@ -195,7 +201,10 @@ static void apbt_set_mode(enum clock_event_mode mode,
> if (timer->quirks & APBTMR_QUIRK_64BIT_COUNTER)
> apbt_writel(timer, 0, timer->reg_load_count + 0x4);
>
> - ctrl &= ~APBTMR_CONTROL_INT;
> + if (timer->quirks & APBTMR_QUIRK_INVERSE_INTMASK)
> + ctrl |= APBTMR_CONTROL_INT;
> + else
> + ctrl &= ~APBTMR_CONTROL_INT;
> ctrl |= APBTMR_CONTROL_ENABLE;
> apbt_writel(timer, ctrl, timer->reg_control);
> break;
> @@ -363,9 +372,13 @@ void dw_apb_clocksource_start(struct
> dw_apb_clocksource *dw_cs) if (timer->quirks & APBTMR_QUIRK_64BIT_COUNTER)
> apbt_writel(timer, 0, timer->reg_load_count + 0x4);
>
> - /* enable, mask interrupt */
> + /* set periodic, mask interrupt, enable timer */
> ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
> - ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
> + if (timer->quirks & APBTMR_QUIRK_INVERSE_INTMASK)
> + ctrl &= ~APBTMR_CONTROL_INT;
> + else
> + ctrl |= APBTMR_CONTROL_INT;
> + ctrl |= APBTMR_CONTROL_ENABLE;
> apbt_writel(timer, ctrl, timer->reg_control);
> /* read it once to get cached counter value initialized */
> dw_apb_clocksource_read(dw_cs);
> diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
> index fbe4c6b..7d36d91 100644
> --- a/include/linux/dw_apb_timer.h
> +++ b/include/linux/dw_apb_timer.h
> @@ -30,6 +30,12 @@
> */
> #define APBTMR_QUIRK_NO_EOI BIT(1)
>
> +/* The IP uses an inverted interrupt-mask bit.
> + * Instead of activating interrupts clearing a maks bit, it needs an
> enable + * bit to be set 1.
> + */
> +#define APBTMR_QUIRK_INVERSE_INTMASK BIT(2)
> +
> struct dw_apb_timer {
> void __iomem *base;
> unsigned long freq;
More information about the linux-arm-kernel
mailing list