OMAP baseline test results for v3.10-rc7

[Paul Walmsley]

Hi

On Mon, 1 Jul 2013, Felipe Balbi wrote:

> On Mon, Jul 01, 2013 at 07:48:50PM +0000, Paul Walmsley wrote:
> > Boot to userspace:
> >     FAIL ( 2/12): 37xxevm, am335xbonelt
> 
> <quoting part of [1]>
> | U-Boot# tftp 0x82000000 am335x-boneblack.dtb
> | link up on port 0, speed 100, full duplex
> | Using cpsw device
> | TFTP from server 192.168.57.1; our IP address is 192.168.57.138
> | Filename 'am335x-boneblack.dtb'.
> 
> Where are you taking am335x-boneblack.dtb from ? It's not in mainline
> v3.10-rc7 kernel:

As mentioned in my earlier reply:

http://www.spinics.net/lists/arm-kernel/msg255055.html

my earlier test boots were with the am335x-boneblack.dtb from the 
ti-linux-3.8.y tree from Vaibhav's github, since that was the only DTB 
that I was able to get any kernel to boot with.

The am33xx_only/appended DTB issues don't apply to this board since it's 
booted with detached DTB and omap2plus_defconfig.

Anyway, just retried it with the mainline am335x-bone.dtb file with v3.10, 
and the board comes up now.  So that's good, will switch to 
am335x-bone.dtb for the testing restate jobs to be run for 
BeagleBone-white, and let's see what previous kernels it boots with now...


- Paul