[PATCH v9 0/8] Generic PHY Framework

[Patel, Satish]

Hi,

> -----Original Message-----
> From: Balbi, Felipe
> Sent: Thursday, July 04, 2013 3:42 PM
> To: ABRAHAM, KISHON VIJAY
> Cc: Patel, Satish; Balbi, Felipe; grant.likely at linaro.org;
> tony at atomide.com; arnd at arndb.de; swarren at nvidia.com;
> sylvester.nawrocki at gmail.com; linux-kernel at vger.kernel.org; linux-
> omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> usb at vger.kernel.org; gregkh at linuxfoundation.org; akpm at linux-
> foundation.org; rob.herring at calxeda.com; rob at landley.net;
> linux at arm.linux.org.uk; benoit.cousson at linaro.org; mchehab at redhat.com;
> cesarb at cesarb.net; davem at davemloft.net; Nayak, Rajendra;
> shawn.guo at linaro.org; Shilimkar, Santosh; devicetree-
> discuss at lists.ozlabs.org; linux-doc at vger.kernel.org; Nori, Sekhar;
> Krishnamoorthy, Balaji T; Cherian, George; Mankad, Maulik Ojas
> Subject: Re: [PATCH v9 0/8] Generic PHY Framework
> 
> On Thu, Jul 04, 2013 at 03:25:32PM +0530, Kishon Vijay Abraham I
> wrote:
> > On Thursday 04 July 2013 02:51 PM, Patel, Satish wrote:
> > >Hi,
> > >
> > >>-----Original Message-----
> > >>From: Balbi, Felipe
> > >>Sent: Wednesday, July 03, 2013 6:51 PM
> > >>To: ABRAHAM, KISHON VIJAY
> > >>Cc: Patel, Satish; grant.likely at linaro.org; tony at atomide.com;
> Balbi,
> > >>Felipe; arnd at arndb.de; swarren at nvidia.com;
> > >>sylvester.nawrocki at gmail.com; linux-kernel at vger.kernel.org; linux-
> > >>omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> > >>usb at vger.kernel.org; gregkh at linuxfoundation.org; akpm at linux-
> > >>foundation.org; rob.herring at calxeda.com; rob at landley.net;
> > >>linux at arm.linux.org.uk; benoit.cousson at linaro.org;
> mchehab at redhat.com;
> > >>cesarb at cesarb.net; davem at davemloft.net; Nayak, Rajendra;
> > >>shawn.guo at linaro.org; Shilimkar, Santosh; devicetree-
> > >>discuss at lists.ozlabs.org; linux-doc at vger.kernel.org; Nori, Sekhar;
> > >>Krishnamoorthy, Balaji T; Cherian, George
> > >>Subject: Re: [PATCH v9 0/8] Generic PHY Framework
> > >>
> > >>Hi,
> > >>
> > >>On Wed, Jul 03, 2013 at 03:35:39PM +0530, Kishon Vijay Abraham I
> > >>wrote:
> > >>>On Wednesday 03 July 2013 03:02 PM, Patel, Satish wrote:
> > >>>>Hi Kishon,
> > >>>>
> > >>>>>-----Original Message-----
> > >>>>>From: ABRAHAM, KISHON VIJAY
> > >>>>>Sent: Wednesday, June 26, 2013 5:17 PM
> > >>>>>To: grant.likely at linaro.org; tony at atomide.com; Balbi, Felipe;
> > >>ABRAHAM,
> > >>>>>KISHON VIJAY; arnd at arndb.de; swarren at nvidia.com;
> > >>>>>sylvester.nawrocki at gmail.com; linux-kernel at vger.kernel.org;
> linux-
> > >>>>>omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-
> > >>>>>usb at vger.kernel.org; gregkh at linuxfoundation.org; akpm at linux-
> > >>>>>foundation.org
> > >>>>>Cc: rob.herring at calxeda.com; rob at landley.net;
> > >>linux at arm.linux.org.uk;
> > >>>>>benoit.cousson at linaro.org; mchehab at redhat.com;
> cesarb at cesarb.net;
> > >>>>>davem at davemloft.net; Nayak, Rajendra; shawn.guo at linaro.org;
> > >>Shilimkar,
> > >>>>>Santosh; devicetree-discuss at lists.ozlabs.org; linux-
> > >>>>>doc at vger.kernel.org; Nori, Sekhar; Krishnamoorthy, Balaji T;
> > >>Cherian,
> > >>>>>George
> > >>>>>Subject: [PATCH v9 0/8] Generic PHY Framework
> > >>>>>
> > >>>>>Added a generic PHY framework that provides a set of APIs for
> the
> > >>PHY
> > >>>>>drivers
> > >>>>>to create/destroy a PHY and APIs for the PHY users to obtain a
> > >>>>>reference to
> > >>>>>the PHY with or without using phandle.
> > >>>>>
> > >>>>>This framework will be of use only to devices that uses
> external
> > >>PHY
> > >>>>>(PHY
> > >>>>>functionality is not embedded within the controller).
> > >>>>>
> > >>>>>The intention of creating this framework is to bring the phy
> > >>drivers
> > >>>>>spread
> > >>>>>all over the Linux kernel to drivers/phy to increase code re-
> use
> > >>and
> > >>>>>to
> > >>>>>increase code maintainability.
> > >>>>
> > >>>>I would like to use this framework for a smart-card controller
> > >>connected to a
> > >>>>smart-card phy. I have some questions and would like to get
> > >>feedback on the same.
> > >>>
> > >>>glad to know that :-)
> > >>>>
> > >>>>I am using “TDA8026" Smartcard PHY from NXP. Here is the link
> for
> > >>datasheet
> > >>>>and app note for the same. The smart card controller is inside
> the
> > >>TI SoC
> > >>>>I am working with.
> > >>>>
> > >>>>Datasheet :
> > >>>>www.nxp.com/documents/data_sheet/TDA8026.pdf?
> > >>>>
> > >>>>Appnote :
> > >>>>http://www.nxp.com/documents/application_note/AN10724.pdf
> > >>>>
> > >>>>The TI SoC details are not public (yet). I can provide details
> to
> > >>you offline.
> > >>>>
> > >>>>Brief about operation:
> > >>>>-	The controller can work with and without a PHY
> > >>>>-	When not using PHY, it is limited to talking to a single
> > >>>>	smart card. There is also a need to put external de-activation
> > >>logic
> > >>>>	on card removal for this case.
> > >>>>-	With a PHY you can use more than one smart card.
> > >>>>-	Phy has 5 slots :  1 for smart card (credit/debit/other
> card
> > >>with chip)
> > >>>>       and others for SAM – SIM like modules
> > >>>>- 	Once the PHY is initialized, there are some operations
> that the
> > >>controller
> > >>>>	can request of the PHY like:
> > >>>>	- Card configurations  - set voltage
> > >>>>	- Activation of card
> > >>>>	- ATR – Answer to reset
> > >>>>	- Warm reset
> > >>>>	- ADPU exchange
> > >>>>	- Deactivation ( Normal/Emergency)
> > >>>
> > >>>hmm.. We should think about extending the phy_ops to include
> these
> > >>>operations (something like phy_smart_card_ops so that other
> > >>>smart_card PHYs will also be able to use it).
> > >>
> > >>let's try to avoid use-case specific additions. set_voltage sounds
> > >>like
> > >>a regulator thing, but the regulator is controlled through the
> PHY. I
> > >>guess it makes sense to have a generic phy_set_voltage() call
> since
> > >>even
> > >>USB can make use of that.
> > >>
> > >>For card activation, it sounds like phy_init()/phy_shutdown()
> would
> > >>cover it.
> > >>
> > >>For warm reset perhaps a phy_reset() callback ? Although that
> could,
> > >>easily, get abused.
> > >>
> > >>For deactivation, that's phy_shutdown().
> > >>
> > >>ATR and ADPU needs more thought, I guess.
> > >>
> > >>>>- 	In the mode when smartcard controller talks directly to
> the
> > >>card without the need
> > >>>>	for a PHY, all the above operations will be carried out by the
> > >>controller itself
> > >>>>
> > >>>>My current thought process is to make the controller driver
> provide
> > >>the user interface
> > >>>>and talk to the PHY using the generic PHY framework you
> proposed.
> > >>In the case where there
> > >>>>is no PHY, my idea is to create a "dummy" PHY which uses the
> > >>controller functionality itself.
> > >>>
> > >>>right. And in the case where you actually have a PHY, create a
> PHY
> > >>>driver and implement the phy_smart_card_ops and register with the
> > >>PHY
> > >>>framework.
> > >>
> > >>I would try to avoid that. Otherwise we will have phy_usb_ops,
> > >>phy_sata_ops, phy_network_ops, phy_pci_ops, etc etc etc. It would
> > >>easily
> > >>blow up.
> > >>
> > >
> > >- I do agree with you. Creating Phy specific ops will blow up whole
> > >   concept of generic phy f/w.
> > >- Can we have interface like phy_setconfig - with parameter like
> > >   phy_setconfig(int param, void *value)
> > >	- Here param can be enum of available config parameters for
> > >	  specific phy.
> > >Phy can perform different operation/set internal state based on
> > >param selection and value passed by.
> > >
> > >e.x in case of smartcard
> > >	enum set_config {
> > >		SET_VOLATAGE,
> > >		SET_ACTIVATE,
> > >		SET_WARMRESET,
> > >		SET_ATR,
> > >		SET_DEACTIVE,
> > >		....
> > >	};
> >
> > hmm.. this looks similar to ioctl and can be abused easily IMO :s
> 
> +1
> 
> What we need is to come up with generic ways to model those, if we
> need
> set voltage, then add a phy_set_voltage() kinda thing, perhaps add
> capability flags to enable/disable support fort those (just like mmc
> does).
> 

This will required study of capabilities of available phys.
Only point of consideration is  - list should not gets exhausted to cover all 
phy capabilities

> But adding something which can handle "anything" like
> phy_set_config(),
> it's the same as adding use-case specific ops.
> 
> --
> balbi