[PATCH 2/6] mtd: atmel_nand: replace pmecc enable code with one function.

Josh Wu josh.wu at atmel.com
Wed Jul 3 05:50:30 EDT 2013


Signed-off-by: Josh Wu <josh.wu at atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
v4 --> v5:
  add blank line after variable declaration.

 drivers/mtd/nand/atmel_nand.c |   41 ++++++++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index e3cc418..5ce13f4 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -747,6 +747,30 @@ normal_check:
 	return total_err;
 }
 
+static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
+{
+	u32 val;
+
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+	val = pmecc_readl_relaxed(host->ecc, CFG);
+
+	if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
+		dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
+		return;
+	}
+
+	if (ecc_op == NAND_ECC_READ)
+		pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
+			| PMECC_CFG_AUTO_ENABLE);
+	else
+		pmecc_writel(host->ecc, CFG, (val | PMECC_CFG_WRITE_OP)
+			& ~PMECC_CFG_AUTO_ENABLE);
+
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+}
+
 static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
 {
@@ -758,13 +782,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	unsigned long end_time;
 	int bitflips = 0;
 
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
-	pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG)
-		& ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE);
-
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+	pmecc_enable(host, NAND_ECC_READ);
 
 	chip->read_buf(mtd, buf, eccsize);
 	chip->read_buf(mtd, oob, mtd->oobsize);
@@ -797,14 +815,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 	int i, j;
 	unsigned long end_time;
 
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
-
-	pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG) |
-		PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE);
-
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+	pmecc_enable(host, NAND_ECC_WRITE);
 
 	chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
 
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list