[PATCH V2 01/11] ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9

Joseph Lo josephl at nvidia.com
Wed Jul 3 05:50:37 EDT 2013


The v7_invalidate_l1 was used for the L1 cache that come out from reset
in a undefined state. This is no need for Cortex-A15. We do it for A9
only.

Signed-off-by: Joseph Lo <josephl at nvidia.com>
---
V2:
* take care the v7_invalidate_l1 in tegra_secondary_startup also
---
 arch/arm/mach-tegra/headsmp.S       | 3 ++-
 arch/arm/mach-tegra/reset-handler.S | 7 +++++--
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 045c16f..2072e73 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -6,6 +6,7 @@
         .section ".text.head", "ax"
 
 ENTRY(tegra_secondary_startup)
-        bl      v7_invalidate_l1
+        check_cpu_part_num 0xc09, r8, r9
+        bleq    v7_invalidate_l1
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 39dc9e7..75285a3 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -40,9 +40,11 @@
  *	  re-enabling sdram.
  *
  *	r6: SoC ID
+ *	r8: CPU part number
  */
 ENTRY(tegra_resume)
-	bl	v7_invalidate_l1
+	check_cpu_part_num 0xc09, r8, r9
+	bleq	v7_invalidate_l1
 
 	cpu_id	r0
 	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
@@ -70,7 +72,8 @@ no_cpu0_chk:
 	str	r1, [r2]
 1:
 
-	check_cpu_part_num 0xc09, r8, r9
+	mov32	r9, 0xc09
+	cmp	r8, r9
 	bne	not_ca9
 #ifdef CONFIG_HAVE_ARM_SCU
 	/* enable SCU */
-- 
1.8.3.2




More information about the linux-arm-kernel mailing list