[GIT PULL 4/7] ARM SoC board specific changes
Arnd Bergmann
arnd at arndb.de
Tue Jul 2 15:06:06 EDT 2013
The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:
Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/boards-for-linus
for you to fetch changes up to f8ace40e88eb7063f66697713373ac64cbc1412a:
Merge tag 'zynq-defconfig-for-3.11' of git://git.xilinx.com/linux-xlnx into next/boards (2013-06-21 15:48:32 +0200)
----------------------------------------------------------------
ARM SoC board specific changes
These are 18 branches on 9 platforms with board specific changes, mostly
for defconfig files, but nothing really exciting in here.
Since the shmobile platform still uses board files for some of the newer
machines, we get a few changes there as the result of drivers getting
enabled for those boards. This causes some conflicts with contents getting
added from multiple branches in sh-mobile specific files. Renesas is
putting a lot of work into migrating to device-tree based setup, which
will make all those files obsolete in the future and avoid both the
conflicts and the need to have these files in the first place.
----------------------------------------------------------------
Aaro Koskinen (1):
ARM: OMAP1: nokia770: enable Tahvo
Adrien Vergé (1):
ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
Andrew Lunn (2):
ARM: Kirkwood: Make use of the QNAP Power off driver.
ARM: Kirkwood: Convert LSXL to restart-poweroff driver.
Arnd Bergmann (5):
ARM: ux500: avoid warning in ux500_read_asicid
Merge tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/.../tmlind/linux-omap into next/boards
Merge tag 'renesas-boards2-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/boards
Merge tag 'zynq-defconfig-for-3.11' of git://git.xilinx.com/linux-xlnx into next/boards
Merge tag 'boards-for-linus' into for-linus
Fabio Baltieri (1):
ARM: ux500: update MSP1 pinctrl defintions
Florian Vaussard (1):
arm: omap: board-overo: reset GPIO for SMSC911x
Guennadi Liakhovetski (2):
ARM: shmobile: kzm9g: enable AS3711 PMIC in defconfig
ARM: shmobile: kzm9g: add AS3711 PMIC platform data
Kuninori Morimoto (13):
ARM: shmobile: bockw: enable SDHI on defconfig
ARM: shmobile: ape6evm: MP clock parent become EXTAL2
ARM: shmobile: bockw: define FPGA address and rename iomem variable
ARM: shmobile: bockw: add CN9 SCIF/RCAN selection dipswitch explanation
ARM: shmobile: bockw: add dummy regulators for SMSC
ARM: shmobile: bockw: add SDHI0 support
ARM: shmobile: marzen: keep local function as static
ARM: shmobile: bockw defconfig: add RTC RX8581 support
ARM: shmobile: bockw defconfig: add M25P80 support
ARM: shmobile: bockw defconfig: add MMCIF support
ARM: shmobile: bockw: add I2C device support
ARM: shmobile: bockw: add SPI FLASH support
ARM: shmobile: bockw: add MMCIF support
Lee Jones (3):
ARM: ux500: Increase the size of the PRCMU's TCPM size
ARM: ux500: Remove incorrect DB9540 PRCMU TCDM base location
ARM: ux500: regulators: Remove misleading comment
Lokesh Vutla (1):
ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
Nobuhiro Iwamatsu (1):
ARM: shmobile: armadillo800eva: Fix maximum number of SCIF
Olof Johansson (11):
Merge tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/boards
Merge tag 'renesas-defconfig-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/boards
Merge branch 'renesas/pinmux-gpio' into next/boards
Merge branch 'renesas/soc' into next/boards
Merge tag 'renesas-boards-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/boards
Merge tag 'ux500-core-for-arm-soc' of git://git.kernel.org/.../linusw/linux-stericsson into next/boards
Merge tag 'ux500-pinctrl-for-arm-soc' of git://git.kernel.org/.../linusw/linux-stericsson into next/boards
ARM: ux500: board-mop500: remove unused pin modes
Merge tag 'bcm2835-for-3.11-defconfig' of git://git.kernel.org/.../swarren/linux-rpi into next/boards
Merge tag 'renesas-defconfig2-for-v3.11' of git://git.kernel.org/.../horms/renesas into next/boards
Merge tag 'tegra-for-3.11-defconfig' of git://git.kernel.org/.../swarren/linux-tegra into next/boards
Patrice Chotard (1):
ARM: ux500: add ABx500 pinctrl tables
Sergei Shtylyov (3):
ARM: shmobile: bockw: enable USB in defconfig
ARM: shmobile: BOCK-W: add Ether support
ARM: shmobile: BOCK-W: change Ether device name
Simon Baatz (1):
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA
Simon Horman (6):
Merge branches 'pinmux' and 'soc' into boards-base
ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1
ARM: shmobile: lager: Add GPIO LEDs
ARM: shmobile: lager: support GPIO switches
ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSC
Merge branch 'soc2' into boards-base
Soren Brinkmann (2):
arm: multi_v7_defconfig: Enable Zynq UART driver
arm: multi_v7_defconfig: Enable initrd/initramfs support
Stephen Warren (2):
ARM: bcm2835: defconfig updates
ARM: tegra: defconfig updates
Ulf Hansson (6):
ARM: ux500: Enable 100MHz for SD/SDIO/MMC devices
ARM: ux500: Don't set plf ocr mask for SD/MMC device
ARM: ux500: Enable support for RPMB and Reliable Write for eMMC
ARM: ux500: Enable support for discard for MMC/SD
ARM: ux500: Set eMMC and WLAN card slot as non-removable
ARM: ux500: Enable support for UHS-I SD-cards
Vladimir Barinov (2):
ARM: shmobile: bockw: enable I2C in defconfig
ARM: shmobile: bockw: enable CONFIG_PM_RUNTIME in defconfig
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 4 +
arch/arm/boot/dts/kirkwood-ts219.dtsi | 5 +
arch/arm/configs/armadillo800eva_defconfig | 2 +-
arch/arm/configs/bcm2835_defconfig | 19 +-
arch/arm/configs/bockw_defconfig | 27 ++-
arch/arm/configs/kzm9g_defconfig | 3 +
arch/arm/configs/multi_v7_defconfig | 3 +
arch/arm/configs/omap2plus_defconfig | 2 +
arch/arm/configs/tegra_defconfig | 23 ++-
arch/arm/mach-kirkwood/Kconfig | 9 +
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/board-dt.c | 4 +
arch/arm/mach-kirkwood/board-lsxl.c | 16 --
arch/arm/mach-kirkwood/board-sheevaplug.c | 27 +++
arch/arm/mach-kirkwood/board-ts219.c | 3 -
arch/arm/mach-kirkwood/common.h | 5 +
arch/arm/mach-omap1/board-nokia770.c | 10 +
arch/arm/mach-omap2/board-omap3evm.c | 4 +
arch/arm/mach-omap2/board-overo.c | 3 +-
arch/arm/mach-shmobile/board-ape6evm.c | 15 ++
arch/arm/mach-shmobile/board-bockw.c | 158 +++++++++++++-
arch/arm/mach-shmobile/board-kzm9d.c | 2 +-
arch/arm/mach-shmobile/board-kzm9g.c | 193 +++++++++++++-----
arch/arm/mach-shmobile/board-lager.c | 49 +++++
arch/arm/mach-shmobile/board-marzen.c | 3 +-
arch/arm/mach-ux500/board-mop500-pins.c | 283 ++++++++++++++++++++++++--
arch/arm/mach-ux500/board-mop500-regulators.c | 1 -
arch/arm/mach-ux500/board-mop500-sdi.c | 34 ++--
arch/arm/mach-ux500/db8500-regs.h | 3 +-
arch/arm/mach-ux500/devices-db8500.c | 2 +-
arch/arm/mach-ux500/id.c | 6 +-
31 files changed, 791 insertions(+), 128 deletions(-)
create mode 100644 arch/arm/mach-kirkwood/board-sheevaplug.c
More information about the linux-arm-kernel
mailing list