[PATCH] arm: kirkwood: readynas duo v2: Add GMT G762 Fan Controller DT bindings

[Jason Cooper]

On Mon, Jul 01, 2013 at 10:31:54PM +0200, Arnaud Ebalard wrote:
> Hi Thomas,
> 
> Thomas Petazzoni <thomas.petazzoni at free-electrons.com> writes:
> 
> > On Mon, 01 Jul 2013 22:23:14 +0200, Arnaud Ebalard wrote:
> >
> >> -        regulators {
> >> -                compatible = "simple-bus";
> >> -                #address-cells = <1>;
> >> -                #size-cells = <0>;
> >> -
> >> -                usb_power: regulator at 1 {
> >> -                        compatible = "regulator-fixed";
> >> -                        reg = <1>;
> >> -                        regulator-name = "USB 3.0 Power";
> >> -                        regulator-min-microvolt = <5000000>;
> >> -                        regulator-max-microvolt = <5000000>;
> >> -                        enable-active-high;
> >> -                        regulator-always-on;
> >> -                        regulator-boot-on;
> >> -                        gpio = <&gpio1 14 0>;
> >> -                };
> >> -        };
> >> +	regulators {
> >> +		compatible = "simple-bus";
> >> +		#address-cells = <1>;
> >> +		#size-cells = <0>;
> >> +
> >> +		usb_power: regulator at 1 {
> >> +			compatible = "regulator-fixed";
> >> +			reg = <1>;
> >> +			regulator-name = "USB 3.0 Power";
> >> +			regulator-min-microvolt = <5000000>;
> >> +			regulator-max-microvolt = <5000000>;
> >> +			enable-active-high;
> >> +			regulator-always-on;
> >> +			regulator-boot-on;
> >> +			gpio = <&gpio1 14 0>;
> >> +		};
> >> +	};
> >>  };
> >
> > Those white-space changes are not related to the addition of the G762
> > Device Tree informations.
> 
> Should I make two unrelated patches (one for G762 and another cosmetic
> one) or simply let the spaces as they are in .dts?

Leave them as they are.  I'm intending to do a cleanup series for all
the whitespace issues in the dts files.

thx,

Jason.