[GIT PULL] power: ab8500-bm: Latest Mainline<->STE delta reduction patch-set

[Lee Jones]

Hi Anton,

> Okay, after Linus Walleij's diligent observaions, I have removed all
> new functionallity related to Deep Debug and will continue to
> investigate what I need to do in that regard.
> 
> In the mean-time, here's the fresh deep-debug:less pull-request:
> 
> ----------------------------------------------------------------
> 
> The following changes since commit 8fd526fd18233887ba652079a369f4eee0de9d9d:
> 
>   qnap-poweroff: Fix license string (2013-01-19 18:04:04 -0800)
> 
> are available in the git repository at:
> 
>   git://git.linaro.org/people/ljones/linux-3.0-ux500.git tb-power-2
> 
> for you to fetch changes up to 34c11a709e928090cf34ecd706f7d3170f4e5026:
> 
>   u8500-charger: Delay for USB enumeration (2013-01-23 14:39:22 +0000)

Did you pull this in the end?

> ----------------------------------------------------------------
> Hakan Berg (1):
>       ab8500-fg: Adjust for RF bursts voltage drops
> 
> Henrik Sölver (1):
>       ab8500-charger: AB workaround for invalid charger
> 
> Jonas Aaberg (2):
>       ab8500-bm: Flush all work queues before suspending
>       ab8500-charger: Do not touch VBUSOVV bits
> 
> Lee Jones (7):
>       ab8500-charger: Kick watchdog
>       ab8500-chargalg: Update battery health on safety timer exp
>       pm2301: Move all configuration and emum structs out to a header
>       file
>       ab8500-chargalg: Only root should have write permission on sysfs
>       file
>       abx500-chargalg: Add new sysfs interface to get current charge
>       status
>       pm2301: LPN mode control support
>       ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata
>       structures
> 
> Loic Pallardy (2):
>       pm2301: Remove volt_now & curr_now properties
>       pm2301: Update watchdog for pm2xxx support
> 
> Martin Bergström (1):
>       ab8500-fg: Go to INIT_RECOVERY when charger removed
> 
> Michel JAOUEN (2):
>       pm2301: Provide u9540 support for the pm2301 charger
>       ab8500-btemp: Adaptation to AB8505 and AB9540 platforms
> 
> Nicolas Guion (1):
>       ab8500-charger: Add support for autopower on AB8505 and AB9540
> 
> Olivier Clergeaud (1):
>       pm2301: Clean-up PM2301 interrupt management
> 
> Paer-Olof Haakansson (1):
>       u8500-charger: Delay for USB enumeration
> 
> Rajkumar Kasirajan (2):
>       pm2301: Enable vbat low monitoring
>       ab8500-fg: Use correct battery charge full design
> 
>  drivers/mfd/ab8500-core.c                 |    6 +
>  drivers/power/Kconfig                     |    7 +
>  drivers/power/Makefile                    |    1 +
>  drivers/power/ab8500_btemp.c              |   67 +-
>  drivers/power/ab8500_charger.c            |  617 ++++++++++++----
>  drivers/power/ab8500_fg.c                 |   51 +-
>  drivers/power/abx500_chargalg.c           |   43 +-
>  drivers/power/pm2301_charger.c            | 1088 +++++++++++++++++++++++++++++
>  drivers/power/pm2301_charger.h            |  513 ++++++++++++++
>  include/linux/mfd/abx500.h                |    3 +
>  include/linux/mfd/abx500/ab8500-bm.h      |   22 +-
>  include/linux/mfd/abx500/ab8500.h         |   19 +
>  include/linux/mfd/abx500/ux500_chargalg.h |    5 +
>  include/linux/pm2301_charger.h            |   61 ++
>  14 files changed, 2306 insertions(+), 197 deletions(-)
>  create mode 100644 drivers/power/pm2301_charger.c
>  create mode 100644 drivers/power/pm2301_charger.h
>  create mode 100644 include/linux/pm2301_charger.h
> 

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog