[PATCH 2/6] usb: add devicetree helpers for determining dr_mode and phy_type

kishon kishon at ti.com
Thu Jan 31 03:17:12 EST 2013


On Thursday 31 January 2013 01:13 PM, Sascha Hauer wrote:
> On Thu, Jan 31, 2013 at 11:44:21AM +0530, kishon wrote:
>> Hi,
>>
>> On Wednesday 30 January 2013 08:59 PM, Sascha Hauer wrote:
>>> From: Michael Grzeschik <m.grzeschik at pengutronix.de>
>>>
>>> This adds two little devicetree helper functions for determining the
>>> dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
>>> the devicetree.
>>>
>>> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
>>> Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
>>> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>>> ---
>>>   drivers/usb/usb-common.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++
>>>   include/linux/usb/of.h   |   27 ++++++++++++++++++
>>>   include/linux/usb/otg.h  |    7 +++++
>>>   include/linux/usb/phy.h  |    9 ++++++
>>>   4 files changed, 112 insertions(+)
>>>   create mode 100644 include/linux/usb/of.h
>>>
>>> diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
>>> index d29503e..1c0292c 100644
>>> --- a/drivers/usb/usb-common.c
>>> +++ b/drivers/usb/usb-common.c
>>> @@ -14,6 +14,9 @@
>>>   #include <linux/kernel.h>
>>>   #include <linux/module.h>
>>>   #include <linux/usb/ch9.h>
>>> +#include <linux/of.h>
>>> +#include <linux/usb/of.h>
>>> +#include <linux/usb/otg.h>
>>>
>>>   const char *usb_speed_string(enum usb_device_speed speed)
>>>   {
>>> @@ -32,4 +35,70 @@ const char *usb_speed_string(enum usb_device_speed speed)
>>>   }
>>>   EXPORT_SYMBOL_GPL(usb_speed_string);
>>>
>>> +#ifdef CONFIG_OF
>>> +static const char *usb_dr_modes[] = {
>>> +	[USB_DR_MODE_UNKNOWN]		= "",
>>> +	[USB_DR_MODE_HOST]		= "host",
>>> +	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
>>> +	[USB_DR_MODE_OTG]		= "otg",
>>> +};
>>> +
>>> +/**
>>> + * of_usb_get_dr_mode - Get dual role mode for given device_node
>>> + * @np:	Pointer to the given device_node
>>> + *
>>> + * The function gets phy interface string from property 'dr_mode',
>>> + * and returns the correspondig enum usb_phy_dr_mode
>>> + */
>>> +enum usb_phy_dr_mode of_usb_get_dr_mode(struct device_node *np)
>>> +{
>>> +	const char *dr_mode;
>>> +	int err, i;
>>> +
>>> +	err = of_property_read_string(np, "dr_mode", &dr_mode);
>>> +	if (err < 0)
>>> +		return USB_DR_MODE_UNKNOWN;
>>> +
>>> +	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
>>> +		if (!strcasecmp(dr_mode, usb_dr_modes[i]))
>>> +			return i;
>>> +
>>> +	return USB_DR_MODE_UNKNOWN;
>>> +}
>>> +EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
>>> +
>>> +static const char *usbphy_modes[] = {
>>> +	[USBPHY_INTERFACE_MODE_NA]	= "",
>>> +	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
>>> +	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
>>> +	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
>>> +	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
>>> +	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
>>> +};
>>> +
>>> +/**
>>> + * of_get_usbphy_mode - Get phy mode for given device_node
>>
>> %s/of_get_usbphy_mode/of_usb_get_phy_mode
>>> + * @np:	Pointer to the given device_node
>>> + *
>>> + * The function gets phy interface string from property 'phy_type',
>>> + * and returns the correspondig enum usb_phy_interface
>>> + */
>>> +enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
>>> +{
>>
>> You agreed to move this function inside usb/phy.. no?
>
> Yes, I did, but as mentioned in the introduction mail, the chipidea
> driver has to determine the phy type even when phy support (aka
> CONFIG_USB_OTG_UTILS) is disabled, so I can't put it in phy/phy.c.
>
> I could add a phy/of.c though. Would that be better?

Yes. I think that would be better.

Thanks
Kishon



More information about the linux-arm-kernel mailing list