[PATCH] ARM: at91/DT: remove atmel, use-dma-* from 9x5 and 9n12 USART nodes

[Nicolas Ferre]

Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the
atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used.
Indeed the connexion between the DMA engine and the slave is not implemented
yet in Device Tree.
Note however that this property is also used for PDC (private DMA) on older
SoCs. This is why the driver alone cannot determine the validity of this
property.

Reported-by: Douglas Gilbert <dgilbert at interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
 arch/arm/boot/dts/at91sam9n12.dtsi | 8 --------
 arch/arm/boot/dts/at91sam9x5.dtsi  | 6 ------
 2 files changed, 14 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 80e29c6..4801717 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -324,8 +324,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
 				interrupts = <5 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -335,8 +333,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
 				interrupts = <6 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -346,8 +342,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
 				interrupts = <7 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -357,8 +351,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
 				interrupts = <8 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 0c60090..d112c3a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -402,8 +402,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
 				interrupts = <5 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -413,8 +411,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
 				interrupts = <6 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -424,8 +420,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
 				interrupts = <7 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
-- 
1.8.0