[PATCH v2 1/2] ARM: kirkwood: Ensure that kirkwood_ge0[01]_init() finds its clock

[Sebastian Hesselbarth]

On 01/30/2013 09:30 AM, Simon Baatz wrote:
> On Wed, Jan 30, 2013 at 01:51:18AM +0100, Sebastian Hesselbarth wrote:
>> - [PATCH v2 2/2] clk: mvebu: Do not gate runit clock on Kirkwood
>>    (no lockup for minimal kernel configs)
>>
>> - [PATCH] NET: mv643xx: get smi clock from device tree
>>    (no lockup for modular DT ethernet)
>>
>> - Some patch that adds MV643XX_ETH_SHARED_NAME ".0" and ".1" clk aliases
>>    (no lockup for modular non-DT ethernet)
>
> I think your patch to get the smi clock is intended for device tree.
> Thus, the driver won't use these aliases, right?

Actually, both patches above will not fix modular ethernet for 3.8-rc as
shared driver is probed before core driver and not requesting any clk at
all. The "NET: mv643xx: get smi clock from device tree" patch is based
on Jason's attempt to separate shared driver.

If we need to fix modular ethernet now, we also need to add a clk_get
to shared ethernet.

But yes, DT doesn't need any clock aliases.

>> - Some patch that adds clk_prepare_enable to ge0/ge1 clocks to
>>    kirkwood_legacy_clk_init()
>>    (retain MAC address for modular DT ethernet)
>
> I like mine better, since it only enables the clocks of the
> interfaces that are initialized in the init code.  I tested it with
> non-DT as well.  But either is fine with me.

I know the difference, but here it is not only about fixing an issue
but have it cleanly removed later on. But I don't have a strong opinion
on that and maybe Andrew or Jason should coordinate what must be fixed
now and how we do it.

Sebastian