[PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data

Luciano Coelho coelho at ti.com
Wed Jan 30 04:06:10 EST 2013


On Wed, 2013-01-30 at 14:18 +0530, Santosh Shilimkar wrote:
> On Wednesday 30 January 2013 02:13 PM, Kumar, Anil wrote:
> > Hi Sourav,
> >
> > On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote:
> >> Hi Luciano,
> >> On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote:
> >>> Hi Sourav,
> >>>
> >>> On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote:
> >>>> Booting 3.8-rc4 om omap 4430sdp results in the following error
> >>>>
> >>>> omap_i2c 48070000.i2c: did not get pins for i2c error: -19
> >>>> [    1.024261] omap_i2c 48070000.i2c: bus 0 rev0.12 at 100 kHz
> >>>> [    1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19
> >>>> [    1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz
> >>>> [    1.043762] omap_i2c 48060000.i2c: did not get pins for i2c error: -19
> >>>> [    1.050964] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz
> >>>> [    1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19
> >>>> [    1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz
> >>>>
> >>>> This happens because omap4 dts file is not adapted to use i2c through pinctrl
> >>>> framework. Populating i2c pinctrl data to get rid of the error.
> >>>>
> >>>> Tested on omap4430 sdp with 3.8-rc4 kernel.
> >>>>
> >>>> Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
> >>>> Reported-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
> >>>> ---
> >>> Could you do the same thing for panda? I'm getting the same kind of
> >>> errors with it:
> >
> > omap4 uses pinctrl-single driver for pinmux with DT. Currently
> > pinctrl-single driver is getting up after I2C driver. So I2c cannot
> > use pinctrl. The below patch solve this issue
> >
> > http://www.gossamer-threads.com/lists/linux/kernel/1669067
> >
> > Can you try with this ? it may solve it.
> >
> OMAP i2c driver already takes care of -EPROBE_DEFER. The issue
> as you see from the log is not probe failure but missing the
> pin information in DT blob. And thats what patch does.

Yes, Santosh is right.  I tried this patch, but it didn't fix the
warnings.

--
Luca.




More information about the linux-arm-kernel mailing list